Bike rear light Light5 Blip, 60 lm

The Light5 Blip is a super handy rechargeable bike rear light, thanks to which you will never be noticed by other road users! The easy-to-use Blip is equipped with a smart sensor that automatically turns the light on when you start moving and turns it off after the bike is stationary for 45 seconds. In addition, the light has an automatic brake light, i.e. the light lights up brighter for 3-5 seconds when the speed of the bike slows down suddenly, i.e. when the brake is pressed. It is therefore a fully automated rear light that takes care of the safety of the cyclist and other road users, even if you forget that the light is there! What makes this light exceptional is the fact that you don't have to touch it yourself before, during or after driving. Of course, the light can also be turned on and off manually , but it always turns off automatically after 45 seconds of standing still, if you haven't remembered to turn it off yourself. The Blip turns on the rear lights with an optimal light output of 60 lumens, thanks to which it shines clearly in both dark and light conditions.

The light has four different operating modes: two evenly burning power modes of varying power (High and Low), fast flashing and slow flashing. The operating mode can be changed when the light is on by tapping the power button, so the mode in use changes with each press. Thanks to the IPX6 waterproof rating, Blip can withstand the inevitable snow, sleet and. water rains, and its performance is not affected by puddles on the route or driving on undulating streets without mudguards either. The lamp works with a built-in 500 mAh battery, which can be easily charged with the supplied USB-C charging cable by twisting the light off the holder. Suitable brackets are supplied for both the seat tube and the bench, and thanks to the saddle bracket, the light can also be installed on bikes with a lift post. One year (12 months) warranty!

Delivery content

• Light5 Blip bike tail light
• USB-C charging cable
• Bracket for seat tube
• Attachment to the saddle

Technical information

• Brand and model: Light5 Blip
• Purpose: As a bike rear light
• Battery: Built-in 500 mAh Li-Po
• Light output: 60 lm
• Light color: Red
• Operating modes: 2 steady, 2 flashing
• Operating time: 5-15 h (depending on power mode)
• Charging: USB-C (cable included in the package)
• Dimensions: 40 x 40 x 25 mm (Length x Width x Depth)
• Weight (without fasteners): 40 g
• IP rating: IPX6
• Warranty: 12 months

Quick guide

Install the lamp bracket to the wheel. The lamp is screwed onto the stand/bracket, which at the same time seals it waterproof.

On/Off: When using for the first time, press the power button in the middle of the light to the bottom for approx. 2 seconds to turn on the light. The light turns off automatically 45 seconds after movement stops, and turns on again when motion is detected. You can also turn the light on or off at any time by pressing the power button down for 2 seconds.

Changing the operating mode: When the light is on, tap the power switch to change the operating mode. The modes cycle with each press as follows: High -> Low -> Fast flashing -> Slow flashing. The last used operating mode remains in the light's memory, i.e. the operating modes always cycle from the mode that was last used.

Brake light: The light turns on High for 3-5 seconds when it detects braking.

Charging: Unscrew the light from the bracket and connect one end of the included USB-C charging cable to the light and the other end to e.g. a computer's USB port or mains adapter. The indicator lights up during charging, and turns off when charging is complete.