Can bus relay XBB PowerUnit 6

XBB PowerUnit 6 is a relay designed for lighting control, which allows up to 6 separate lights to be connected to a CAN bus-controlled vehicle. As its name suggests, PowerUnit 6 has six outputs, each of which can be connected to a max. 120W load, i.e. one PowerUnit 6 enables the installation of up to six lights using one relay. The operating principle of the relay is exactly the same as the original XBB PowerUnit, but it allows more lights or different functions of the lights (such as parking lights, reversing lights, etc.) to be connected than before.

PowerUnit 6 is intended for use with the XBB Dongle control unit, for example, when installing additional lights when the excitation current cannot be taken directly from the bulb's power cable, but the high beam signal must be captured from the OBD-II port. The Dongle is installed in the OBD-II port, from which it captures the high beam signal, and sends the information to the PowerUnit, which in turn controls the light installed in the car according to that signal. Up to four PowerUnit relays can be connected to one Dongle control unit, i.e. using PowerUnit 6 relays, the outputs are currently 24.

Note! The relay allows for the direct installation of 6 x 120W powerful lights. It can also be used to install more powerful lights with a small and easy additional installation. See instructions here.

Note 2! The XBB PowerUnit only works in conjunction with the Dongle control unit, so if you don't already have a control unit, you can buy a ready-made set that includes the PowerUnit 6 as well as the Dongle control unit.

Specifications

• Rated voltage: 12/24V
• Operating voltage: 9-36V
• Power consumption in sleep mode: 4 – 5.3 mA
• Maximum load: 6 x 120W @ 12V
  • For lights over 120W, see installation instructions here
• Connection: 10 x 6.3 mm
• Dimensions:
• Weight:
• Operating temperature: -40 - 85°C
• IP rating: IP53
• EMC/Approvals:
  • EN 50498:2010
  • EN 50581:2012
  • RED 2014/53/EU
  • EN 300328 – V2.1.1
  • EN 301489-01 – V2.1.1
  • EN301489-17 – V3.1.1
  • EN 60950 – 1:2006
  • /11:2009
  • /A1:2010
  • /A12:2011
  • /A2:2013
  • EN 62479:2011-09
  • RoHS 2011/65/EU
• Warranty: 12 months