Bicycle lamp Fenix BC30 V2 - 2200 lm / Rechargeable

The Fenix ​​BC30 V2 is a bicycle light powered by two batteries that has a maximum luminous flux of 2200 lumens (Burst mode). The bike light's patented Dual Lens optics in combination with two modern LED lights provide a pleasant combined light image that illuminates both the environment in front of the front tire and further along the road, without dazzling other road users. The Fenix ​​BC30 V2 is suitable for daily use for example commuting or road cycling in all seasons. The bike light has four different power modes and a flashing burst mode, which enables you to easily find a suitable light flow for your specific needs. The burst mode is activated quickly and easily from the included remote control and provides a powerful light flow of 2200 lumens with a range of almost 190 meters. The Fenix ​​BC30 V2 is powered by batteries, either 2 x 18650 or 4 x CR123A. Batteries not included.

Contents (Lamp Only)

• Fenix ​​BC30 V2
• Attachment
• Adapter for bracket
• Remote control with associated battery
• O-ring seal
• Instructions for use

Contents (Complete Package)

• Fenix ​​BC30 V2
• Attachment
• Adapter for bracket
• Remote control with associated battery
• O-ring seal
• Instructions for use
• 2 x 18650 batteries
• Smart charger

Technical specification

• Brand and model: Fenix ​​BC30 V2
• Area of ​​use: Bicycle light
• LED: 2 x LUMINUS SST-40-N5
• Battery: 2 x 18650 or 4 x CR123A
• Manufacturer's declared luminous flux: 2200 lm
• Manufacturer's declared range: 187 m
• Battery time: 2.3h - 50h
• IP rating: IP67
• Weight: 154 g (without battery)
• Dimensions: 120 x 50 x 31.8 mm
• Warranty: Bicycle light, 60 months / Battery & charger 12 months

Quick guide

To insert batteries into the lamp, unscrew the cover on the underside of the lamp. Then close the lid. The Fenix ​​BC30 V2 is switched on and off by pressing the switch on the top of the lamp for about 0.5 seconds. To change the power mode, quickly press the power button to let the lamp cycle through the different modes in the order: Eco - Low - Medium - High. Double-clicking the power button activates the flashing Burst mode.

The lamp can also be controlled using the remote control, which gives you the opportunity to control the lamp without letting go of the handlebars. To turn on the light, hold down the top button for 0.5 seconds. To change power mode and brightness, press the same button once. By holding down the top button, you turn off the light. Burst mode is activated by pressing the lower button, and it lights up as long as the button is pressed.