Bicycle lamp Fenix BC30R V2, 1800 lm

The Fenix BC30R V2 is a rechargeable bicycle light with a digital OLED display with a maximum luminous flux of 1800 lm. The light picture is combined with a wide focused spot in the middle with fine scattered light all around. The centered hotspot gives a nice range, while the scattered light gives a nice light sideways and to the nearby environment. Maximum range 160 meters. The neutral color temperature is pleasant to the human eye and provides a nice light even in poor conditions. The digital OLED display shows the remaining battery time in hours and minutes, which gives you full control and prevents you from being surprised by sudden darkness. The Fenix BC30R V2 has four power modes and a strobe mode. In addition, the so-called Burst mode can be activated, which provides a high light flux of 1800 lm and a range of 160 meters. The bicycle lamp is charged via the Micro-USB port on the side of the lamp using the included charging cable.

Content

• Bicycle light Fenix BC30R V2
• Built-in 3.7V 5200 mAh Li-lon battery
• Handlebar bracket
• Remote control
• Micro-USB charging cable
• Adapter for bracket
• Instructions for use

Technical specification

• Brand and model: Fenix BC30R V2
• Area of use: Bicycle light
• Battery: Built-in 3.7V 5200 mAh Li-lon battery
• LED: Cree XM-L2 U2
• Manufacturer's reported luminous flux: 1800 lm
• Manufacturer's reported range: 160 meters
• Battery time: 2h 40 min - 36h
• Protection class: IP66
• Weight: 222 g
• Dimensions: 114 x 32 x 51 mm
• Warranty: 24 months

Quick guide

The BC30R V2 is switched on and off using the switch on the top of the lamp. When the light is on, the remaining battery time is shown on the OLED display. The Fenix BC30R V2 is switched on and off by pressing the switch on the top of the lamp for about 0.5 seconds. To change the power mode, press the (+) or (-) buttons on the top of the lamp. Double-clicking the power button activates the flashing Burst mode.

The lamp can also be controlled using the remote control, which gives you the opportunity to control the lamp without letting go of the handlebars. To turn on the light, hold down the top button for 0.5 seconds. To change power mode and brightness, press the same button once. By holding down the top button, you turn off the light. Burst mode is activated by pressing the lower button, and it lights up as long as the button is pressed.