Flashlight Fenix RC20, 1000 lm

The Fenix ​​RC20 is a powerful flashlight that is charged via the included docking station. According to the manufacturer, the Fenix ​​RC20 shines with a max. luminous flux of 1000 lumens and a range of almost 300 meters. In terms of performance, the RC20 is one of the best rechargeable USB dock lights on the market. The lamp is very simple and easy to use. The RC20 has two different operating modes: normal operating mode, where four different power modes can be selected, or two function modes. The lamp is both charged and stored in a robust charging dock, which is easy to install on a wall, car, boat or similar.

RC20 has developed functions for both the charging dock and the lamp that indicate the need for charging and the remaining battery level. Via the charging dock, you can easily check the charging progress. The charging dock is connected via a USB cable (230V charging connector included). The lamp is completely waterproof and dustproof according to IP68 protection class.

The Fenix ​​RC20 is a reliable partner for service and maintenance tasks, security, outdoor use, etc. or anywhere you want to be able to charge the flashlight conveniently in the charging station.

Content

• Fenix ​​RC20
• Fenix ​​​​ARB-L1 2600 mAh battery
• USB charging station
• 230V USB charging connector
• Holster for belt
• Wrist strap
• Extra O-ring seal
• Instructions for use

Technical specification

• Brand and model: Fenix ​​RC20
• LED: Cree XL-L2 U2
• Battery: 2600 mAh Li-ion
• Manufacturer's reported luminous flux: 1000 lm
• Manufacturer's reported range: 290 m
• Manufacturer's reported light intensity: 21100 cd
• Charging: Charging station
• Dimensions: 161 x 25.4 x 40 mm
• Weight: 305 g (without battery)
• Shock resistance: Withstands drops from up to 1 meter
• IP rating: IP68
• Warranty: 60 months

Burning time (according to the manufacturer)

• Turbo: 1000 lm / 1 h 10 min
• High: 425 lm / 2 h 55 min
• With: 150 lm / 9 h 50 min
• Low: 10 lm / 120 h

Quick guide

Unscrew the back pressure on the lamp and remove the plastic film that protects the battery terminals. Tighten the cap. The lamp is turned on by pressing the power switch once. To change the operating mode, press the function switch next to the power switch while the lamp is on. The four different power modes are scrolled by pressing the function switch.

If you only want to use the lamp with only two power modes, it can be set by holding the power switch for three seconds while the lamp is on. To return to normal mode, hold the power button again for three seconds.