Flashlight Nitecore MH40 Pro, 3500 lm

The Nitecore MH40 Pro is a powerful rechargeable flashlight with a narrow beam that can reach up to 1300 meters. Thanks to the UHi 40 MAX LED, a deep reflector and innovative Precision Digital Optics Technology (PDOT), the 3500 lumen output of the torch is harnessed into a very narrow spot that maximises the beam's range. The narrow beam combined with a relatively lightweight design makes the MH40 Pro an excellent light for hunters, authorities and military personnel. The light comes with a wireless, dual-function remote switch for easy use with a weapon. All functions of the light can be controlled by two buttons on the remote switch in addition to the light's own switch, so there is no need to change the weapon position while the light is operating and no need to take your eyes off the target.

The MH40 Pro is made of hard-anodised aluminium and its optical lens is coated with a durable anti-scratch film. The grip surface of the lamp is designed to be very grippy, so the grip will not slip at any point of use. All in all, the MH40 Pro is designed to withstand heavy use and extreme conditions, as evidenced by its IP68 enclosure rating, making it fully protected against dust and water. The luminaire uses advanced temperature regulation technology, ATR (Advanced Temperature Regulation), which automatically reduces the light output if the temperature gets too high. This prevents the luminaire from overheating, causing damage or hazards.

The luminaire is equipped with a tactical reverse switch that can be used to switch the light on momentarily or continuously. The luminous intensity can be adjusted by means of a button on the side of the luminaire. The same button can also be used to monitor the battery charge. When the battery is more than 50%, the button flashes three times, and when the battery is less than 50%, it flashes twice. One flash indicates that there is less than 25% power left. The lamp also features a modern flicker indicator when the battery charge is less than 10%. The light is powered by the NBP100R 10000 mAh battery (included), which can be charged via the USB-C charging port. The lamp can also be used with two 21700 batteries (not included) if required. 5-year (60 months) warranty!

Delivery content

• Nitecore MH40 Pro
• 1 x NBP100R Li-ion battery (10000 mAh)
• Remote switch
• 2 x Picatinny rail clips
• USB-C charging cable
• 2 x Hook-and-loop Straps
• Hook-and-loop strap
• Strap
• O-ring
• Belt holster
• Instructions for use (EN)

Technical specification

• Make and model: Nitecore MH40 Pro
• Power supply: 1 x NBP100R Li-ion battery, 10000 mAh (included) or 2 x 21700 (not included).
• Manufacturer's declared light output: 3500 lm
• Range claimed by the manufacturer: 1300 m
• Charging: USB-C
• Charging time: approx. 3 h 40 min
• Light beam: narrow
• Switch: tactical rear switch
• Operating modes: 7
• Material:Hard-anodized aluminium
• Dimensions: 256 x 65 mm (Length x Diameter of lamp head)
• Weight (without battery): 270 g
• Impact resistance: 1 m
• IP rating: IP68
  • Kestää upotuksen 2 metrin syvyyteen
• Warranty: 60 months

Operating times (Stated by the manufacturer)

With NBP100R battery

• Turbo: 3500 lm / 45 min / 1300 m
• High: 1300 lm / 4 h 15 min / 920 m
• Mid: 400 lm / 13 h / 480 m
• Low: 80 lm / 62 h / 220 m
• Strobo: 3500 lm / -
• Lighthouse: 3500 lm / -
• SOS: 3500 lm / -

2 x 21700 batteries

• Turbo: 2000 lm / 1 h / 900 m
• High: 1200 lm / 4 h 15 min / 800 m
• Mid: 400 lm / 15 h / 490 m
• Low: 80 lm / 65 h / 220 m
• Strobo: 2000 lm / -
• Lighthouse: 2000 lm / -
• SOS: 2000 lm / -

Quick guide

Open the rear cap of the luminaire and insert the batteries + pole above into the luminaire. Tighten the cap carefully.

The rear switch:

• On/Off: Turn the lamp on or off by pressing and holding the rear switch until you hear a click.
• Momentary light: when the lamp is off, press the tail switch halfway down to activate the momentary light mode. When you want to turn the lamp off, release the reverse switch.

Mode switch:

• Luminous intensity control: when the lamp is on, the luminous intensity can be adjusted by pressing the button on the side of the lamp. The light output rotates in the following order:
  • Low -> Mid -> High -> Turbo.
• Special Modes: when the lamp is on, press and hold the Mode button on the side of the lamp to scroll through the special modes. The special modes rotate in the following order:
  • Strobe -> Beacon -> SOS

Remote switch:

• The fixture and remote switch are shipped pre-paired, so the switch is ready to use right out of the box.
• On/Off: When the light is off, press the A button on the switch to the bottom to turn the light on. When the lamp is on, press the A button on the switch to turn it off.
• Operating modes.

Charging: insert the batteries into the lamp, then plug the supplied USB-C charging cable into the lamp. Once the charging cable is plugged into the lamp, press the back switch to start charging. The indicator light on the lamp will flash steadily while charging is in progress. If the batteries are not in place, are in the wrong position or are the wrong type, or if charging is activated when the lamp is not on, the indicator light will indicate this either by going out or by flashing rapidly. When the batteries are fully charged, the indicator light will remain steady.