Flashlight Olight Arkfeld, 1000 lm

Olight Arkfeld is a rechargeable flashlight in a convenient size, equipped with a green laser pointer. The lamp has five different power modes and a flash function, and despite its small size, it provides a maximum output of up to 1000 lumens with a range of 101 meters. The lamp has a pleasant combination beam, which means that Arkfeld can illuminate both wide and far, and thus it is suitable for many different needs. The green laser can also be used in connection with, for example, presentations or when you want to point to a certain area or object, for example when working or when hiking. The lamp can be held in the hand as usual, or it can be attached to any metal surface using the magnet on the back, thus freeing both hands to work. Arkfeld is really light, weighing only 87 grams, and thanks to its compact size and light weight, it can be easily carried around. Arkeld also has a clip on the side of the lamp, which can be used to attach it to, for example, a breast pocket or a backpack.

Arkfeld is a stylish and compact flashlight whose flat design makes it unique and easy to handle. All functions of the lamp are easy to use and controlled via the switch on top of the lamp: By turning the switch, you can switch between the laser pointer and the flashlight quickly. All the different functions of the lamp, such as normal light and flash light can be adjusted via the middle button on the switch. Arkfeld is also equipped with a convenient memory function, from which it lights up with the same power mode that was last used (Moonlight, Low, Medium and High power), if the lamp is turned on again within a minute. With its protection class IPX7, the lamp is completely protected against water, so it can be used without any worries in all kinds of weather conditions.

The lamp works with a built-in battery, which can be conveniently charged through the magnetic charging port on the back of the lamp along with the included charging cable. There are four battery indicator lights, from which the battery status can be monitored both during use and during charging. That way, the battery will never run out unexpectedly. When all four indicator lights are green, the battery has 75-100% remaining. When three lights are on the battery is 50 - 75%, when two lights are on 25 - 50% and when one light is on 10 - 25%. When an indicator light is red, the battery has less than 10% left. When the battery is connected to the charger, the indicator light on the charging cable lights up red as long as the battery is charging. When the light is green, the battery is full.

Content

• Olight Arkfeld
• Built-in battery
• MCC3 magnetic charging cable
• Instructions for use

Technical specification

• Brand and model: Olight Arkfeld
• Battery: Built-in 1050 mAh Li-Po
• Manufacturer's reported luminous flux: 1000 lm
• Manufacturer's reported range: 101 m
• Color temperature: 5700 - 6700 K
• Light picture: Combined
• Power modes: 5
• Power switch: On the top of the lamp
• Charging: Magnetic charger (MCC3) (included)
• Material: Aluminium
• Dimensions: 110 x 25 x 15 mm (Length x Width x Depth)
• Weight: 87 g
• Withstands a drop height of 1 meter
• Protection class: IPX7
• Warranty: 24 months
• Other: Green laser

Burning times (manufacturer's information)

• Turbo: 1000 lm -> 300 lm / 4 + 110 min
• High: 300 lm -> 60 lm / 126 + 34 min
• Medium: 60 lm / 11 h + 50 min
• Low: 15 ch / 41 h
• Moonlight: 1 ch / 8 days

Quick guide

The switch in the middle

• On/Off: Press the center button to turn the light on and off. When the lamp turns on, it uses the previously selected power. (Monlight, Low, Medium and High power settings remain in the memory after the lamp is turned off. When the lamp is in turbo mode, the memory remains as High power, and when the lamp is turned off for more than one minute, it will turn on Medium power at the next time. The flash light setting will not remain in the device's memory)
• Brightness adjustment: When the light is on, the brightness (Moonlight, Low, Medium and High) can be adjusted by pressing and holding the middle button. Brightness is selected by releasing the button. (Flash, Laser and Turbo modes must be activated separately).
• Moonlight: When the light is off, press and hold the button for more than one second to enter Moonlight Mode. Moonlight mode remains in the light's memory, and will be switched on again when the light is turned on.
• Turbo mode: Press the button twice quickly to activate the turbo mode. Double tap again to return to the previous brightness mode. If the light is turned off in high brightness mode, the light will next turn on in medium brightness mode. If the light is turned off in Medium, Low or Moonlight mode, the device starts with the saved mode.
• Flash: When the lamp is not locked, quickly press the power button three or more times to activate the flash function. To turn off the flash function, press or hold the button.
• Timer: The flashlight has a long (9 minutes) and short (3 minutes) timer, which automatically turns off the light. With the flashlight on, double-click and hold the button on the current brightness to access the timer settings. One blink indicates the short timer, while two blinks indicate the long timer. The flashlight automatically turns off when the timer is on. Once the timer is set, you can double-click and hold the button to toggle between the settings. When the previous timer is finished and you go back to the time setting, the lamp will automatically use the previous selection again.

Green laser

• On/Off: Turn the switch counterclockwise and press the button to turn the laser mode on and off.
• Key lock activation/deactivation: When the light is off, press and hold the button (about 2 seconds) until Moonlight or Laser mode turns on or off to lock the light. In locked mode, the red indicator light indicates that the button lock is activated. Press and hold the button (about 1 second) until the light turns on in Moonlight or Laser mode to disable the button lock.

Selection of operating mode

• Turn the switch clockwise to select lighting mode or counterclockwise to select laser mode.