Flashlight Olight Baton 3 Premium Edition, 1200 lm

Content

• Olight Baton 3 Premium Edition
• Olight Custom IMR16340 Li-Ion Battery, 550 mAh
• Charging case/power bank
• USB-C cable
• Microfiber cloth
• User manual (EN, FI, SE, NO)

Technical specification

• Brand and model: Olight Baton 3 Premium Edition
• Battery: 1 x Olight Custom IMR16340 Li-lon battery, 550mAh
• Battery capacity: 3.6V 3500 mAh
• Maximum luminous flux: 1200 lm
• Cone of Light: Combination
• Range: 166 m
• Light intensity: 6889 cd
• Effect modes: 4 pcs + moonlight + strobe
• Switch: Button on the front of the lamp
• Material and color: Black aluminum
• Lamp dimensions: 63 x 21 mm
• Bag dimensions: 83 x 60 x 31 mm
• Weight (incl. battery): 53 g
• Weight (incl. bag): 167 g
• Protection class: IPX8 (withstands immersion in water to a depth of 2 meters)
• Warranty: 60 months
• Importer: Handshake Sweden AB

Power modes (manufacturer's information)

• Level 1: 1200 lm -> 300 lm / 1.5 - 75 min
• Level 2: 300 lm / 95 min
• Level 3: 60 lm / 7 h 30 min
• Level 4: 12 ch / 33 t
• Level 5 (Moonlight): 0.5 lm / 20 days
• Strobe :-

Quick guide

Open the charging case and remove the plastic. Open up the body of the lamp and remove the plastic between the battery and the lamp. The lamp is switched on and off with a short press of the switch. The lamp lights up on the last used power mode.

Switching Power Modes: When the lamp is on, press and hold the switch to switch between power modes. Release the switch when the desired power mode is active.

Turbo: Double click the switch. Switch back to the other effect modes by holding down the switch or by double-clicking.

Timer: The lamp is equipped with a timer, which automatically turns it off after either 3 or 9 minutes of use. When the light is on, double click and hold the switch on the second button until you get to the timer settings. 1 blink indicates the 3-minute timer is active, while 2 blinks indicate the 9-minute timer is active.

Strobe Mode: Triple click the switch while the light is off. Press and hold the switch to return to the normal power modes.

Moonlight: Long press the switch while the lamp is off. The lamp then lights up in Moonlight mode. Release the switch before the light goes out, in that position the button lock is activated.

Button lock: When the light is off, hold down the switch for about 2 seconds, until the light comes on briefly and then goes off again. You turn off the button lock in the same way. You can also unscrew the bottom piece a little to avoid accidentally turning on the lamp.

Charging: Charging starts when the USB connector is connected to the charging socket. The charger has an indicator where you can follow the charging status. The red light is on when charging is in progress, and the green light is on when the battery is fully charged.