Flashlight Olight Warrior X 4, 2600 lm

The Olight Warrior X 4 is an extremely stylish, rugged and durable rechargeable flashlight that represents the brightest tip of tactical lights in every area. Warrior X 4 is an updated version of its manufacturer's highly popular Warrior X 3 light, and its maximum light output of 2600 lumens and a light beam reaching up to 630 meters raise the bar again for tactical lights in the compact size category. Warrior's light beam is a great combination of both range and width: the intense and very bright spot in the middle of the beam creates a really long range, while the diffuse light spread around the main beam illuminates the terrain around the spot evenly. The high-quality combined light beam allows the light to be used versatilely in different situations, and that is why Warrior X 4 is the perfect choice for official use, hunting and construction sites, as well as for demanding hobby activities and household chores.

The light can be used either momentarily or continuously via the rear switch, so the switch enables both tactical and normal use. The lamp has two power modes, both of which can be operated directly via the rear switch, i.e. the user interface is very easy. The lamp's shock-resistant body is made of hard-anodized aluminum, and the tail switch and the frame protecting the lens are made of stainless steel, so this lamp offers unprecedented durability and reliability for challenging conditions and demanding tasks. In addition, according to the IPX8 classification, the lamp is completely protected against water, and it can withstand a momentary submersion of up to 2 meters, so even extreme conditions do not affect its operational reliability.

Warrior X 4 works with a high-performance 5000 mAh li-ion battery, which offers an operating time of more than 2.5 hours at full power and approx. 8 hours at lower power mode, so it is a good partner even for a whole working day. The battery can be charged, as usual for Olight, through the magnetic end cap inside the lamp, and as a novelty, a separate USB-C charging port has been introduced into the lamp body, which enables charging through it with any USB-C charging cable. The "vibration indicator" that tells the battery charge status, known from previous models, can also be found in the Warrior X 4 model, i.e. when the battery has less than 30% left, the lamp vibrates every five minutes. When the charge level drops below 10%, it vibrates once per minute and six times per minute when the battery charge level has dropped below five percent.

All in all, the Olight Warrior X 4 is a great choice for military and official use as well as for demanding hobbies, or for anyone who needs absolute reliability in any situation. Small dents are usually not felt anywhere with a full-blooded flashlight, and getting wet in rain, sleet or even on the bottom of a lake is no problem. Five-year (60 months) warranty!

Delivery content

• Olight Warrior X 4
• 1 x 21700 5000 mAh li-ion battery
• USB-C charging cable
• Belt holster
• Instructions

Technical information

• Brand and model: Olight Warrior X 4
• Battery: 1 x 21700, 3.6V 5000 mAh li-ion
• Declared light output: 2600 lm
• Declared range: 630 m
• Declared color temperature: 5700-6700 K
• Light beam: Narrow, pitched combination beam
• Switch type and location: Tactical switch behind the light
• Operating modes: 2 power modes
• Charging: Magnetic USB charging (MCC3) OR USB-C charging
• Color: Black
• Material: Hard-anodized aluminum/stainless steel
• Dimensions: 149 x 26 mm (Length x Width)
  • Lamp head diameter: 39.5 mm
• Weight (with battery): 249 g
• IP rating: IPX8
• Impact resistance: 2 m
• Warranty: 60 months

Operating hours (provided by the manufacturer)

Normal mode

• High: 2600 lm -> 1000 lm -> 300 lm / 3 + 140 + 20 min / 630 m
• Low: 300 lm / 8 h / 210 m

Tactical mode: 1000 lm -> 300 lm / 159 + 20 min / 390 m

Quick guide

Commissioning: Open the screw cap at the back of the lamp by turning it counter-clockwise. Remove the insulating plastic between the battery and the lamp and screw the end cap tightly.

Use of the lamp: The Warrior X 4's switch can be pressed lightly or all the way to the bottom. Turn the light on and off by pressing the switch briefly (not all the way to the bottom). A light press activates low light output, and a hard press activates full output. By pressing the switch for a long time (lightly or hard), you can temporarily use the lamp for the desired time. The light turns off when you release the switch.

Key lock: Unintentional switching on of the lamp is prevented by turning the lamp switch open about 1/4 of a turn. This should be used, for example, during the transport and storage of the lamp.