Headlamp Armytek Wizard C2 Magnet USB, 1200 lm

The Armytek Wizard C2 Magnet USB is a compact and light, but at the same time durable and multifunctional lamp that is easily charged with the supplied magnetic USB charger. The headlamp has many different uses, such as fishing, cycling, running, etc. The multifunctional lamp is suitable for many different areas of use, such as fishing, cycling, running, etc. Wizard C2 works with an 18650 Li-Ion battery (included) and according to the manufacturer, it provides a maximum output of up to 1200 lm (warm 1120 lm). At full power, the light reaches 108 meters (warm 106 m) according to the manufacturer. The lamp is completely shockproof and waterproof in accordance with enclosure class IP68.

Wizard C2 Magnet USB is available with both cool and warm LED. The warm LED is slightly less powerful, but it reproduces the colors a little better than the cool one. Choose the appropriate option!

Note! You can find a suitable spare charger for the lamp here: USB charger Armytek AMC-02

Content

• Armytek Wizard C2 Magnet USB Headlamp
• Headband
• 18650 Li-Ion battery (3200 mAh)
• Magnetic USB charger
• Belt clip
• Extra o-rings (2 pcs.)
• Manual

Technical specification

• Brand and model: Armytek Wizard C2 Magnet USB
• Power source: 3200 mAh 18650 Li-Ion battery (included)
• Manufacturer's reported luminous flux: 1200 lm / 1120 lm (warm)
• Manufacturer's reported range: 108 m / 106 m (warm)
• Manufacturer's reported burning time (maximum power): 2h 45 min (580 lm after 4 minutes)
• Manufacturer's reported burn time (minimum power): 200 days
• Lighting: Wide combination
• Operating mode: 6 pcs
• Dimensions: 112 x 33 mm
• Weight: 64 g
• Protection class: IP68
• Shock resistance: 10m drop
• Warranty: 120 months

WARNING! The luminous flux of this headlamp is very high. Although the headlamp has active temperature monitoring that reduces the light flow if the fixture overheats, the light energy itself can heat a nearby material to very high temperatures. It is therefore important to follow the safety instructions below:

1. Do not leave the lamp on with an obstacle within 5 cm in front of the lens!
2. Unscrew the bottom piece (the "cork" on the bottom of the lamp) half a turn to break the circuit and prevent accidental switching on, e.g. in a pocket.
3. A strong and efficient lamp is absolutely no toy! Do not let the lamp be used by a child without strict supervision!

Quick guide

Unscrew the end cap and insert the battery. Screw the end cap firmly. The lamp is switched on and off by pressing the button once. The luminous flux is changed by holding down the power switch while the lamp is on, so that the lamp switches through the power modes. When the desired mode is found, release the power switch. Maximum power can be accessed from any power mode by double-clicking the button. Charging takes place by connecting the charger to the USB port, and the other end is connected with a magnet to the back of the lamp. ATTENTION! The bottom piece must be unscrewed a little to start charging.