Key ring lamp Nitecore TIKI GITD, 300 lm

Nitecore TIKI GITD (Glow in the dark) is a very small key ring lamp with 300 lm luminous flux and a lot of different properties. With the length of a little finger and a weight of only 12 g, the TIKI GITD is easy to carry on your key ring. The versatility is increased by the fact that the sides of the lamp have been equipped with LEDs with UV light and a high color rendering index (CRI). The UV light can e.g. be used to check the authenticity of banknotes or identity documents. The high CRI means that the colors of the illuminated surface are reproduced in a true-to-life way, as if they were illuminated by sunlight. Among the lamp's features, we also find a fluorescent lamp body, which is luminescent in the dark. The lamp body is "charged" with light either from the sun or from its own light source. You easily control the different light sources with a single switch. The double-click switch prevents the lamp from being turned on accidentally, e.g. in the pocket. Comes with both a key ring and a hook for easy attachment.

TIKI GITD's lamp body is made of durable polycarbonate and has a built-in rechargeable Li-ion battery, which is charged via Micro-USB. The light source consists of a high-quality Osram P8 LED, which together with the reflector optics provides a soft and balanced light image. TIKI GITD fully charges in just 80 minutes, so it's always quick to get it ready for use. ATTENTION! The lamp charges with a Micro-USB cable, and it works with pretty much any such cable. It therefore does not require a special charging cable, and therefore the lamp is delivered without a cable.

Technical specification

• Brand and model: Nitecore TIKI GITD
• Battery: Built-in 130 mAh Li-ion battery
• LED: Osram P8 (end) / High CRI LED (side) / UV LED 500 mW (side)
• Manufacturer's reported luminous flux: 300 lm
• Manufacturer's reported range: 71 m
• Manufacturer's reported max. light intensity: 1260 cd
• Wavelength of UV light: 365 nm
• Power modes: 7
• Charging: Micro-USB
• Charging time: approx. 80 min
• Length: 55 mm
• Lamp head diameter: 14.7 mm
• Weight: 12 g
• Protection class: IP66
• Warranty: 24 months

Burning time (manufacturer's information)

• High: 300 lm / 71 m / 30 min
• Medium: 60 ch / 31 m / 1 h
• Low: 15 ch / 15 m / 4 h
• Ultra Low: 1 ch / 4 m / 40 h
• UV: 500 mW / - m / 45 min
• High CRI (constant): 22 lm / - m / 1 h 30 min
• High CRI (flashing): 22 lm / - m / 20 h

Quick guide

On off

Double-click the switch to turn on the lamp on Ultra Low mode. Turn off the light by pressing and holding the switch.

Change effect mode

When the lamp is on, pressing the switch causes the lamp to switch between the power modes in the following order: Low - Med - High - Ultralow - Low - etc. When the light is off, you can momentarily activate the High mode by holding the switch down at the bottom. The light goes out when you release the switch.

Change effect mode (High CRI / UV)

When the lamp is off, triple click the switch to turn on the lamp's UV LED. Click again to access the High CRI LED. Turn off the light by pressing and holding the switch.

Charge

Connect a charging cable to the micro-USB port. The battery indicator shows the charging status – blue light means charging is in progress, and when the battery is full the blue light turns off.