LED stripRGB - Normal Power / Indoors, 5 m

Easy to install, multi-colored LED strip intended for indoor use, with a quick and easy installation. LED strips with RGB function can be used for both stylish and atmospheric detail lighting and useful work lighting. The LED strip is equipped with 60 LEDs/meter and 20 colors of each color (red, green and blue), which gives a large selection of colors. In addition to the 5 meter long LED strip, a transformer, a user-friendly remote control and receiver for adjusting the color temperature and brightness are included in the package. Suitable for indoor installation!

The strip is very easy to install, the transformer's connector is easily connected to the receiver, which in turn is connected to the LED strip. Simply put, the receiver is mounted between the strip and the transformer. The remote control's range is up to 20 meters, is very user-friendly and can be used to change the color and brightness of the LED strip. You can find accessories for LED strips here.

Content

• LED strip PureStrip Multicolor RGB, 5 m
• PureStrip transformer, Max. power 24W
• IR Control unit for RGB LED loop, wireless

Technical specification

• Strip length: 5 m
• Width of the strip: 1 mm
• Strip cutting distance: 5 cm
• The effect of the strip: 4.8 W/m - 5 m = 24 W
• Light flux of the strip: 450 lm / m
• Strip operating voltage: 12 V
• Protection class of the molding: IP20
• List color: Multicolor RGB
• Transformer: Max power 24 W
• Transformer operating voltage: 110 - 240V AC
• Transformer output voltage: 12V DC
• Transformer dimensions: 115 x 44.5 x 28 mm (Length/Width/Height)
• Warranty: 12 months

Quick guide

Installing the LED strip is very easy. If a transformer is used in the installation, the connection after this is feasible even for a person without prior knowledge.

The LED strip is equipped with a high-quality self-adhesive tape, which makes it very easy to mount on most surfaces. Before installation, it can be smart to "test install" the strip in place to see how the light is directed.

Installation

1. "Test install" the strip to see how the light behaves in place.
2. Then mount the molding using the double-sided tape.
3. Cut the molding to a suitable length.
4. Connect the transformer's connector to the receiver with "Plug & Play".
5. Connect the LED strip to the receiver via the "Output" port with screw function. (see below).
6. Connect to the mains.

The cutting distance of the strip is indicated on the strip and sits with a 5 cm margin and can be cut without problems if the entire strip of 5 meters is not needed. There are also solutions for splicing that make it possible to get lighting longer than 5 meters or to build on a cut strip.