Auxiliary light bracket Purelux Single bracket kit, Tesla Model 3

Purelux's Single Bracket Kit is a close-fitting additional light bracket designed for the Tesla Model 3. The holder consists of two separate mounting lugs shaped like the bumper of the Model 3, which allow the lamp to be installed very neatly below the license plate. Thanks to the car-specifically shaped brackets, the light sinks into the recess below the license plate at the level of the bumper, so the installation is smooth and subtly elegant and makes the installation look as if the light had already been in place when it left the factory.

The Single Bracket Kit Tesla Model 3 is compatible with most 500-560 mm long additional light panels with a frame height of approx. 40-50 mm and end brackets. In theory, the width of the stand can be adjusted steplessly, but if installed too wide, the stand will be visible from behind the license plate, and if installed too narrow, it may require a little bending in order to install the light correctly. It is therefore best suited for panels with a length of approx. 500-560 mm, e.g. Purelux's Panther Aero S540 . The light attaches to the stand neatly from the attachment point of the end legs. The stand is attached to the bumper itself with a total of 12 screws (6 per stand), which ensure a sturdy, wobble-free installation and the fact that no additional supports are needed.

NOTE! You can find a complete auxiliary kit here: Tesla Model 3 auxiliary light kit

Technical information

• Product: Additional light bracket Purelux Single Bracket Kit Tesla Model 3
• Purpose: Installation of an additional light on the Tesla Model 3 bumper
• Infinitely adjustable width, compatible with lights 500-560 mm long
  • The light should be a maximum of approx. 40-50 mm high (depending on the shape of the frame)
• Compatible with the EU plate