Wiring harness with relay Purelux Pro Series 12V, DT-2

The Purelux ProSerie relay cable set is the solution for easy and convenient installation of additional lights. Other relay cables on the market often require the purchase of connectors from around the world etc. depending on the connection method, but this relay kit contains everything you need.

The Purelux relay cable kit can be fitted with one to four high beams, depending on the model. A relay wiring kit with one connector is enough to connect a single lamp, but if you intend to add another lamp (or more) in parallel, it is a good idea to buy a relay wiring kit with at least two connectors, and leave the extra connectors unused first. The relay cable kit fits directly into the 12V system.

Simple connection:

The cable set has a total of three cables to be connected:

1. DT connector. Connect to the additional light's DT connector. If there is no DT connector and you want to connect to a cable stub, you can cut off the connector.
2. Control current. Connect the blue cable to the car's electrical system that turns on the high beams. A simple solution is to connect a "thief" on the car's existing plus supply to the high beams. Then the LED light bar is switched on at the same time as the main beam is switched on.
3. Power source. Connect red cable (positive pole) and black cable (earth/minus pole) to the car's power source, for example junction box or battery. Done!

Technical specification

• Make and model: Relay cable set 12V Purelux Extra light DT connector
• Area of use: Connecting additional lights on vehicles
• Deutch DT connectors for 1-4 high beams
• Splash-proof fuse box
• Cable length from relay to lights approx. 2 meters (also suitable for trucks)
• Fits 12V system
• Power thief contacts included
• Warranty: 12 months