Rechargeable worklight Nightsearcher Solaris Pro, 16,000 lm

The Nightsearcher Solaris Pro is a versatile rechargeable work lamp with a luminous flux of up to 16,000 lm for demanding professional use. High luminous flux and selectable light pattern offer the best possible lighting for all situations, either a very wide working light or a narrower search light beam. Of course, both the wide and narrow spotlight can also be switched on at the same time for maximum illumination when needed. The wide beam illuminates a huge area at a time, and when used with a narrow beam, the light beam reaches up to 500 meters. The 18 Ah Li-Ion battery offers an impressive operating time of 2 hours and 15 minutes even at full power, and when the luminous flux is reduced, the burning time can be increased to up to 24 hours. In addition, the light flux can be adjusted separately based on the desired/necessary burning time. The Nightsearcher Solaris Pro is excellent, for example, as a temporary work light or to illuminate accident sites.

The whole lighting package fits in the same compact package, and the whole package weighs only 7000g, so it is easy to carry around. Solaris Pro can be quickly put into use and when in use, the lighting part can be raised to a height of up to 185 cm with a handy, adjustable stand. The lamp is waterproof according to protection class IP65 and you don't have to worry about its durability even with heavy use.

Content

• Lighting package
• Built-in 18,000 mAh Li-Ion battery
• AC charger
• Shoulder strap

Technical specification

• Brand and model: Rechargeable work light NightSearcher Solaris Pro
• Manufacturer's reported luminous flux: 16,000 lm
• Manufacturer's reported range: 500 m
• Battery: 18,000 mAh Li-Ion
• Operating hours: 02.25 - 24.00
• Charging time (0-100%): 6 hours
• Spotlight: Combination
• Operating modes: 9 operating modes (3 + 3 + 3)
• Weight: 7000 g
• Dimensions (in transport condition): 517 x 155 x 220 mm (L x W x D)
• Maximum height: 185 cm
• Warranty: 36 months

Operating hours

Boost (both wide and narrow beam at the same time)

• Full: 16,000 lm / 2 h 15 min
• Half: 8000 lm / 4 h 30 min
• Low: 4000 lm / 9 h

Search light

• Full: 5000 lm / 6 h
• Half: 2500 lm / 12 h
• Low: 1250 lm / 24 h

Wide work light

• Full: 11,000 lm / 3 h 45 min
• Half: 5500 lm / 7 h 30 min
• Low: 2750 lm / 15 h

Quick guide

Commissioning : Spread out the support legs that are on the side of the lamp. Adjust the lamp to the desired height and angle. Press the power button on the control panel to turn on the lamp. Light flow and burning time can be controlled in two different ways: the light can be adjusted either to the desired light flow or to the desired/necessary burning time.

Adjust the luminous flux: When the light is on, press the setting button under the power button, and the luminous flux changes with each press.

Adjustment of operating mode (search light, wide working light or both at the same time ) : When the light is on, press and hold the setting button, so that the light scrolls through the operating modes in the order Wide-Narrow and both. Release the switch when the desired operating mode is active.

Adjusting the burning time: First select the desired operating mode (narrow, wide or both). After that, adjust the desired/necessary burning time with the arrow buttons located on the control panel. The lamp automatically adjusts the luminous flux to match the desired burning time.

Strobe : If desired, the strobe mode can be activated by pressing and holding the power button. The flash is turned off by pressing the power button once.

Charging: Connect one end of the charger to the lamp and the other to the outlet. The indicator light on the charger lights up red when charging is in progress and changes to an error when the battery is full. The lamp's control panel also shows the charging status. The lamp can be used with the lowest luminous flux during charging.

The lamp also has a so-called safety light function: if the lamp is on the charger and the power is on, the lamp switches off automatically. The function can be activated as follows: Switch on the lamp (without the charger connected). Connect the charger to the outlet and the other end to the lamp. The light turns off automatically and the safety light function turns on.