Reflex sight Olight Osight S

The Olight Osight S is a compact red dot sight from Olight, a company known for its high-quality flashlights, headlamps and weapon lights. Olight's previous experience with weapon lights and laser sights combined with them has enabled them to gain experience in the field to support product development. The quality, practicality and price of the products have made the manufacturer very well-known in gun circles, especially on the other side of the Atlantic.

• Compact size - smaller than Osight or Osight X
• Red 2 MOA dot + 32 MOA ring
• Standard mount (RMSc) - compatible with almost all OR guns
• Updated charging hood allows charging even with high sights
• Closed structure - dirt or water cannot disturb the point unlike in an open structure
• 12 brightnesses (10 DL, 2 NV)
• Operating time up to 87,600 hours
• Rechargeable, no battery changes
• The protective hood functions as a power bank and charges the scope 3 times
• 1 x magnification, no distortion or parallax
• Unlimited eye distance
• 1 MOA adjustment clicks (29 mm / 100 m, 7 mm / 25 m)
• Adjustment range +- 35 MOA
• 3 operating modes: manual, auto-adjusting and locked
• Auto-off and wake-up functions
• IPX7 waterproof, shockproof
• Lightweight, only 27.5 g

Olight Osight S is a compact red dot sight intended for sports shooting, training and professional use, especially for pistol use. The biggest advantage of a red dot sight compared to traditional iron sights, in addition to speed, is that you can keep both eyes open and focused on the target, and when the weapon is brought in front of your eyes, the dot appears precisely on the target, allowing you to aim without changing the focus of your eyes (with iron sights, you should aim your gaze at the front edge). In addition to the red 2 MOA dot, the sight also has a 32 MOA ring, which can be used either together or separately with the dot. The sharp and clear pattern, wide brightness settings, very long operating time and large lens allow you to customize the sight to suit all types of situations. With Osight S, you can find the target image even in difficult positions much easier than with traditional iron sights.

The Osight S' shock-resistant and waterproof body is made of OAL™ aluminum alloy, which is more durable, yet almost as light as standard aluminum alloys. The durability and quality of the sight are also evidenced by the stress test of over 10,000 shots, in which the sight's alignment did not change at all. Osight S is therefore durable even in hard use and is a reliable companion for even demanding users. The sight is powered by a built-in battery, which allows for lightness and slimness as well as very long firing times: When used with the dot reticle pattern (without the ring) in power mode 3 (the dimmest daytime setting), it works for up to a whopping 21,900 hours (2.5 years) on its own, and an impressive 87,600 hours (10 years) when used with the battery case. With the same dot pattern, at mode 12 (brightest), which is easily enough for full sunlight, the continuous operating time is 385 hours (over 16 days) or 1540 hours (over 64 days) when used with the battery case. At its shortest, the operating time with both dot and ring activated and the brightest possible setting is 204 hours with the protective case, i.e. 8.5 days continuously. Practical burn times are considerably longer, as the brightness reduction significantly extends the operating time (at mode 3, with both dot and ring modes activated, the operating time is 80,000 hours (over 9 years).

What makes this red dot sight special is that the protective hood that comes with it also functions as a charging case and power bank. The sight is automatically fully charged whenever the hood is in place. The hood's 220 mAh battery allows the sight to be charged from empty to full 3 times. This, added to the sight's very long operating time, ensures that the battery will never run out, as the case quadruples the firing times. For example, in official use, the protective hood can be put in place after every shift, which means the sight will be fully charged during storage. The innovative display on the hood indicates the charge of both the charging hood and the sight's battery in real time, meaning the user never has to guess how much power is left.

The red dot sight can be used in three different operating modes:

• Manual: The desired brightness is selected manually, as well as the sight being turned on and off manually
• Locked: A mode specifically designed for tactical use, where the desired setting is selected in manual mode, after which the scope is moved to locked mode, meaning the brightness does not adjust even when the switches are pressed.
• Automatic: brightness automatically adjusts to ambient light, the scope automatically turns off after 10 minutes of inactivity and wakes up automatically when moved

NOTE! The scope comes with four different screws that can be used to fit almost all Optic Ready pistols. Below you will find the manufacturer's compatibility chart, which lists the models they have already tested. In addition, we offer a 30-day satisfaction guarantee and return policy for the product, meaning you can order the scope, test it on your own equipment and return it if you don't like it or it doesn't fit.

Compatible models

You can check the right Osight and mounting hardware for your specific gun using the manufacturer's tool: Osight compatible models.

These models have been tested by the manufacturer. Also suitable for other weapons using a standard mount.

• Sig Sauer P365 OR/P365 XL/P365 XMACRO
• Sig Sauer P356 Fuse
• Glock G43x MOS/48MOS
• Springfield Armory Hellcat OSP
• Springfield Armory XD's Mod2 OSP
• Palmento State Armory Micro Dagger
• Smith & Wesson Equalizer
• Smith & Wesson M&P9 SHIELD PLUS OR
• Canik Mete SFT (with Canik adapter plate)
• Canik Mete MC9/MC9L/MC9LS
• Canik TP9 Elite SC
• CZ P09C
• Taurus Gx4 Carry
• Shadow Systems CR920
• IWI Masada Slim
• Ruger Max 9
• Mossberg MC2sc
• Kimber R7 Mako OR
• Avidity Arms PD10
• Beretta APX A1 Carry (with Beretta adapter plate)

Delivery content

• Olight Osight S red dot sight
• Charging case
• Adjustment tool
• USB-C charging cable
• 3 x M3 x 10.5mm screw
• 3 x M3 x 11.5mm screw
• 3 x M4 x 9.4mm screw
• 3 x M4 x 10.5mm screw
• 3 x #6-32 x 0.433"
• 3 x #6-40 x 0.374"
• 3 x #6-40 x 0.449"
• Protective bag
• Cleaning cloth
• Wrist strap
• User manual

Technical data (red dot sight)

• Brand and model: Olight Osight S
• Reticle: Red 2 MOA + 32 MOA ring
• Lens size: 0.83" x 0.55" (21 x 14 mm)
• Magnification: 1x
• Sight adjustment range: +- 35 MOA
• Operating time: up to 87,600 hours
• Battery: Built-in 46 mAh Li-Po
• Charger: Magnetic charger
• Brightness settings: 12 (10 day settings, 2 night settings)
• Frame material: OAL
• Operating temperature: 0 - +45°C
• Dimensions: 40 x 24.8 x 24.6 mm
• Weight: 27.5 g
• IP rating: IPX7
• Shock resistance: 1 m drop
• Warranty: 24 months

Technical specifications (charging case)

• Battery size: 220 mAh Li-Po
• Charger: USB-C charging
• Dimensions: 42.4 x 29.9 x 37.5 mm
• Weight: 33g
• IP rating: IPX4

Quick guide

• On/Off: Turn the scope on by pressing either switch (+ or -) once. Turn the scope off by pressing both switches simultaneously for about 1 second.
• Brightness adjustment: The brightness of the red dot sight is adjusted in manual mode using the + and - keys. In automatic mode, the brightness is adjusted automatically.
• Changing the operating mode: The scope has two different operating modes: Manual mode and Automatic mode. The operating mode is changed by pressing the + switch at the bottom for 3 seconds while the scope is on. The scope will flash once to indicate activation of Manual mode and twice to indicate activation of Automatic mode. Differences between the operating modes:
  
  • Manual: The desired brightness is selected manually
  • Auto: Brightness is automatically adjusted according to the ambient light level
• Motion Sensor: The motion sensor on the red dot sight can be turned on or off by pressing the minus switch down for 3 seconds. The dot will flash once to indicate that the motion sensor is on and twice to indicate that it is off. When the sensor is on, the sight will turn itself off after 10 minutes of inactivity and will turn on automatically when the sight moves.
• Battery charge indicator: The red dot sight displays the battery charge on the LED between the switches when either button is pressed as follows:
  • green: over 50%
  • yellow: 20-50%
  • red: 10-20%
  • flashing red: less than 10%
• Charging: The red dot sight charges automatically when the protective case is placed over the red dot sight. The protective case is charged using the included USB-C cable.