Remember Valostore's satisfied customer guarantee - order and test in real conditions of use. Free return if you are not satisfied!

6838 LUMEN - 388 METERS

COMPLETE LIGHT PACKAGE FOR MOUNTING ON HELMET OR SCOOTER!

The packages are based on the LUMONITES® DX6500 lamp, which guarantees power and range! A DX6500 lamp produces a whopping 6838 lumens (measured in Valostore's light laboratory). With a set of two lamps, a shocking luminous flux of up to 13,676 measured lumens is achieved. This amount of light, combined with precision machined reflector optics, illuminates the terrain in a way never seen before. The top-quality GoPro-compatible helmet mount enables a range of up to 388 meters. The diffuse light created by the lamp provides a wide and comprehensive light image of over 180°, which means that the driver's entire field of vision is illuminated without any dark areas. The helmet is not included in the package.

Note! If you are looking for a smaller but affordable light package for your helmet, you should take a look at the Snowmobile light/helmet light LUMONITE Navigator2 (DX3500)

The lamp can either be attached to a helmet or to the snowmobile, for example on the hood to act as a super efficient additional light. With the included GoPro-compatible mount, endless motoring possibilities are created, but can be advantageously mounted on the helmet. By mounting the lamp on the helmet, the light can always follow the direction of the eye, and in this way there is always light where it is needed. This gives the driver better conditions to react and plan his driving. In addition, you get lighting outside the scooter's own lights, e.g. when you turn your head backwards or sideways. Of course, the same light works not only for scooter riding, but also for enduro, motocross, off-road or downhill cycling, etc.

The packages include either one or two LUMONITEⓇ Slimcore 100 batteries which provide a maximum light flow for up to 2 hours, there are also packages that include (can also be purchased separately if desired) a 12V transformer, which supplies the lamp with power directly from the scooter. These packages have not been created by chance, but have been created for situations where absolute maximum performance and power are required.

Note! A high-quality GoPro mount (and a 360°, GoPro-compatible stand) is included, which makes it easy to attach the light to, for example, a helmet. The mount can be adjusted both vertically and laterally.

Depending on the package, the lamp is supplied with 1 or 2 pieces of 50 and 120 cm extension cables, which enables an easy installation on, for example, a helmet. In addition, necessary brackets are included for neat cable management. Thanks to the light's GoPro adapter, the light can be attached to all GoPro-compatible mounts. The packages are both efficient and complete, offering countless possibilities of use that will allow you to enjoy your hobby even after the sun has gone down!

1 lamp incl. battery + GoPro mount (6838 lumens):

• 1 pc Lumonite DX6500 lamp (incl. silicone protective ring)
• 1 pc Lumonite Slimcore 100, li-ion battery
• 1 pc Lumonite DXC charger (Charging time approx. 4 hours)
• 1 pc Lumonite DXEC Extension cord (50 cm)
• 1 pc Lumonite DXEC Extension cord (120 cm)
• 1 pc Lumonite helmet mount with adhesive, 360°, GoPro compatible
• 2 pcs cable mounts for helmet mounting 5 mm
• 1 pc Storage bag

2 lamps incl. battery + GoPro mount (13676 lumens):

• 2 pcs Lumonite DX6500 lamps (incl. silicone protective ring)
• 2 pcs Lumonite Slimcore 100, li-ion battery
• 2 pcs Lumonite DXC chargers (Charging time approx. 4 hours)
• 2 pcs Lumonite DXEC Extension cord (50 cm)
• 2 pcs Lumonite DXEC Extension cord (120 cm)
• 2 pcs Lumonite helmet mount with adhesive, 360°, GoPro compatible
• 4 pcs Cable mount for helmet mounting 5 mm
• 2 pcs Storage bag

1 lamp with transformer (6838 lumens):

• 1 pc Lumonite DX6500 lamp (incl. silicone protective ring)
• 1 pc Lumonite transformer, 12-17V
• 1 pc Lumonite DXEC Extension cord (50 cm)
• 1 pc Lumonite DXEC Extension cord (120 cm)
• 1 pc Lumonite helmet mount with adhesive, 360°, GoPro compatible
• 2 pcs cable mounts for helmet mounting 5 mm
• 1 pc Storage bag

1 lamp incl. battery + helmet mount (6838 lumens):

• 1 pc Lumonite DX6500 lamp (incl. silicone protective ring)
• 1 pc Lumonite Slimcore 100 , li-ion battery
• 1 pc Lumonite DXC charger (Charging time approx. 4 hours)
• 1 pc Lumonite DXEC Extension cord (50 cm)
• 1 pc Lumonite DXEC Extension cord (120 cm)
• 1 pc Lumonite helmet mount with adhesive, 360°, GoPro compatible
• 2 pcs cable mounts for helmet mounting 5 mm
• 1 pc helmet mount "Bow"
• 1 pc Storage bag

2 lamps incl. battery + helmet mount (13676 lumens):

• 2 pcs Lumonite DX6500 lamps (incl. silicone protective ring)
• 2 pcs Lumonite Slimcore 100 , li-ion battery
• 2 pcs Lumonite DXC chargers (Charging time approx. 4 hours)
• 2 pcs Lumonite DXEC Extension cord (50 cm)
• 2 pcs Lumonite DXEC Extension cord (120 cm)
• 2 pcs Lumonite helmet mount with adhesive, 360°, GoPro compatible
• 4 pcs Cable mount for helmet mounting 5 mm
• 1 pc helmet mount "Bow"
• 2 pcs Storage bag

2 lamps with 2 transformers (13676 lumens):

• 2 pcs Lumonite DX6500 lamp (incl. silicone protective ring)
• 2 pcs Lumonite transformer, 12-17V
• 2 pcs Lumonite DXEC Extension cord (50 cm)
• 2 pcs Lumonite DXEC Extension cord (120 cm)
• 2 pcs Lumonite helmet mount with adhesive, 360°, GoPro compatible
• 4 pcs cable mounts for helmet mounting 5 mm
• 2 pcs Storage bag

Lumonite DX6500 is designed based on user feedback and manufactured specifically to meet the needs of the most demanding users. The cone of light produced by the DX6500 lamp is very wide, but produces a very strong spot in the center of the light beam, which has a measured range of a whopping 388 meters. The light produced is wide enough to illuminate the entire field of vision at once, providing a very pleasant user experience.

The starting point – maximum continuous luminous flux

The starting point for Lumonite DX6500's design has been the highest possible continuous power - and the maximum cooling power required. This has been achieved by making the entire lamp a large cooling element with cooling fins. The lamp's fixture is made in a single piece of T6061 aluminum, which ensures the best possible heat dissipation. In addition, the advanced thermal management electronics constantly monitor the lamp's temperature and keep the light output as high as possible under all conditions.

Technical specification

• Brand and model: Lumonite DX6500
• Battery: Lumonite Slimcore 100, 99.4 Wh / 14.4 V / 6900 mAh
• Max power: 55W
• Valostore's measured luminous flux: 6838 lm
• Valostore's measured range: 388 meters
• Valostore's measured color temperature: 5234 K
• Charging time: approx. 4 hours
• Advanced, intelligent heat management electronics
• Dimensions / weight (lamp): 63 x 84 x 42 mm / 155 g
• Battery dimensions / weight: 169 x 79 x 25 (H/W/D) / 480 g
• Protection class (lamp): IPX6
  • Protection class (battery): IPX4
• Warranty: Lamp 60 months / Charger 24 months / Battery 12 months

Performance (ANSI/FL1) (one lamp)

• Max: 6500+ lm* / 388 m / 2:00 h (*Measured maximum output: 6838 lm)
• High: 3100 lm / 260 m / 4:40 h
• Medium: 1000 lm / 150 m / 15:50 h
• Low: 270 lm / 80 m / 59:00 h

Emergency light - does not turn off suddenly

Lumonite DX6500's lamp fixture is equipped with an intelligent backup light function. Instead of draining the entire battery's capacity and the lamp going out abruptly, the brightness is automatically reduced to approx. 250 lumens when the remaining battery is low. This reserve mode gives you over half an hour of extra light, all so that you are not suddenly left alone in the dark.

Quick guide

Lumonite DX series lamps are easy to use. The lamp is switched on by using the switch on the top of the lamp. Then a button press switches between the effect modes in the order low-med-high. The maximum mode is activated with a simple double click. Double-click again to return to the previous effect mode.

Note! The transformer package is delivered with an ON/OFF switch. When connected to a lamp, the transformer consumes some current even when the lamp is off, so during long storage it can drain the vehicle's battery if the transformer is connected directly to the battery. Therefore, you should install a circuit breaker in between. The best solution is, of course, to connect the transformer directly to e.g. the vehicle's fuse box or other place where the current is interrupted when the vehicle is switched off and the battery is not discharged.

User manual in PDF format: Lumonite DX6500 Manual (opens in new window)