Warning light Purelux Strobe Round - 8W / 36 mm / 12V/24V

The Purelux Strobe Round is a stylish recessed warning/strobe light designed to be part of the lighting for heavy equipment and work machinery. The recessed mounting of the lamp means that only the front of the lamp and the lens are visible. Strobe Round can be installed either designated mounting brackets already on the vehicle, or it can be mounted in its own place, for example in the bumper, rear or side of the vehicle. Thanks to its smaller size (diameter 36 mm), Strobe Round fits nicely and discreetly into the vehicle structure. The warning light is equipped with four orange 3W LEDs and 12 different operating modes.

Strobe Round is approved for use in road traffic according to the ECE R65XA1 class, which means that it can also be used for road works in traffic. Thanks to the wide operating voltage, the lamp can be connected to both 12V and 24V systems. The elegant appearance combined with the small size ensures that the warning light fits practically all vehicles. Strobe Round is also protected against radio interference according to R10 class. Two year (24 month) warranty!

If desired, several lamps can be connected together to work together, then the lamps can be synchronized with each other. In this way, the warning lights can be made to flash in the same operating mode at the same time, so that the lighting is uniform. The lamps can be synchronized with each other by connecting the yellow wires coming from the lamp. If the white wires in addition to the yellow one are connected to the power (+) of some of the lights, they are always lit when the others (the ones that do not have the white wire connected) are off and vice versa. In this way, the lights can also be synchronized so that they flash at different speeds, i.e. alternately. In this case, for example, half of a large number of lights can be made to flash at a different time than the other half. Of course, this can also be activated with only two lights.

Note! Synchronization works with the same lights, ie all Round Strobes can be synchronized together.

Content

• Purelux Strobe Round - 8W / 36 mm
• Mounting screws
• Connection and installation instructions (EN)

Technical specification

• Brand and model: Purelux Strobe Round
• Area of use: As a warning and attention light
• LED: 4 x 3W
• Light colour: Orange
• Operating voltage: 10 - 30V
• Manufacturer's reported power: 12W
• Operating modes: 12
• Dimensions: 36 x 40 mm (Diameter x Length)
• Weight: 55 g
• Cable length: approx. 50 cm
• Approvals: EMC: ECE: R10, R65XA1
• Protection class: IP67
• Warranty: 24 months
• Importer: Handshake.fi

Operating modes

• Simple flash
• Double flash
• Triple flash
• Quadruple flash
• Multi flash
• Rotating (1-4)
• Slow single flash
• Slow double flash
• Slow double flash
• A little speed
• Single-double flash
• Distorted light
• Constant light

Quick guide

Coupling

• Red : Current
• Black : Earth
• Yellow : Synchronization, change of operating mode, reset
  • Synchronization: select the same operating mode for the lamps to be synchronized, then connect the yellow wires to the lamps. In this way, the lamps flash in the same rhythm and change operating mode (all together) when the operating mode of a lamp changes.
  • Change operating mode: Apply power (+) to the yellow wire, the lamp will change operating mode. Can be implemented with a circuit breaker (the cable is connected to the battery or other power source, and a pressure switch is inserted in between)
• White : Alternative synchronization
  • Alternating synchronization: If the white wires of some of the lights besides the yellow one are connected to the power (+), they are always lit when the others (white wires not connected) are off and vice versa. In this way, the lights can also be synchronized so that they flash at different rates.