Weapon light Armytek Parma C2IR Pro, 1250 lm

Armytek Parma C2IR Pro is a tactical weapon light that is equipped with a bright narrow light beam that can reach up to 320 meters and a separate infrared light function. The lamp's powerful LED and high-performance battery produce a light output of 1250 lumens, which, combined with a precision-machined glass lens, create a spot beam optimized for aiming with a gun. In addition, the lamp has four IR LEDs (infrared LEDs), which are designed for use with night vision goggles. Thanks to the bracket integrated in the light, the lamp can be attached to both Picatinny and Weaver rails without additional tools, and thanks to its small and low design, the light does not protrude from the profile of the weapon almost at all. Due to the light construction, it also does not change the gun's center of gravity much. In addition, Parma C2IR Pro is equipped with an easy user interface, and all power modes can be operated using only one finger. The light is also supplied with a remote control switch, which enables the light to be easily used from various weapon outlets. The Parma C2IR Pro runs on either a rechargeable 18650 battery or two CR123A batteries.

The Parma C2IR Pro comes with an 18650 li-ion battery, which provides continuous operation time for white light for 1.5 hours and for IR light for 2 hours at a time. For longer periods of use, the power source can be replaced with 2 CR123A batteries when the battery is empty, so that the operating time can be extended even indefinitely. The light does not need to be removed from the gun when changing the batteries, so changing the power source is effortless. Parma C2IR Pro is equipped with an intelligent temperature regulation system, which lowers the light output when the temperature rises too high, so that the lamp or the battery cannot be damaged. In addition, the lamp is protected against water and dust according to the highest IP rating (IP68), and it can withstand drops of up to 10 meters. All in all, it is a high-quality, durable and efficient weapon light designed for the needs of both soldiers and hunters. 10-year (120-month) warranty!

Delivery contents

• Armytek Parma C2IR Pro
• 1 x 18650 li-ion battery
• Remote control switch
• Picatinny and Weaver mounts for remote switch
• Velcro fastener for remote control switch
• Protective covers for the remote control switch connector
• 2 x Ties
• Mounting screws
• Hex key
• Spare O-ring
• Instructions

Technical information

• Brand and model: Armytek Parma C2IR Pro
• Purpose: As a weapon light, e.g. in a rifle
• Power supply: 1 x 18650 battery / 2 x CR123A batteries
• Light output stated by the manufacturer: 1250 lm
• Range stated by the manufacturer: 320 m
• IR light: 1.6 W / 940 nm
• Operating modes: 1 + 1 Flash + IR light
• Clutch type and location: Tactical rear clutch, clutch lever on the side
• Material and color: Hard-anodized aluminum alloy, black
• Dimensions: 147 x 43.3 x 41.3 mm
• Weight (without battery): 130.5 g
• Impact resistance: 10 m
• IP rating: IP68
  • Withstands immersion up to 2 meters (for 5 hours)
• Other: Fits Picatinny and Weaver rails
• Warranty: 120 months

Operating hours (provided by the manufacturer)

• Turbo: 1250 lm -> 600 lm / 1 min + 1 h 50 min / 320 m
• Strobe: 1250 lm -> 600 lm / 3 min + 2 h 40 min / -
• IR light: 1.6 W / 2 h

Quick guide

To use: Tighten the head of the flashlight. To change the power source, unscrew the head of the lamp, install the battery or batteries following the polarity instructions and tighten the head of the lamp tightly.

Operation with tactical tail switch: Turn on the light by tapping the switch twice. Tap the switch once to turn off the light. Turn the Strobe on by pressing the switch three times in a row. Activate tactical mode by tapping the switch once and then pressing the switch down.

Changing the operating mode: The lamp has two different modes: bright white light or IR light. Switching between operating modes is done by moving the switch lever when the light is off. The lever switch is also used to activate the locking function to prevent accidental switching on. If the lever switch is moved to another position while the light is on, the switching of operating modes and the activation of the locking function are not performed.