Led bar Lazer Triple-R 1250 Smartview - Straight / 59 cm / 105W

The Lazer Triple-R 1250 Smartview is an led bar with a really high light flow and a long range. It is one of the market's most modern and most developed light bars, and is, among other things, equipped with an automatically adjustable light pattern that changes depending on the speed and the surrounding environment. In addition, the light is dimmed when the bar is switched off, so that the eyes can more easily get used to the change in light. The optimized reflector technology and the new LEDs provide an enormous range and a light flow that is called enough! The patented E-BOOST technology makes it possible to use the bar at a lower power in road traffic (E11) and with a higher power outside normal road traffic. More about the characteristics of the bar below. To control the special functions, a separate control box is required, which you can find here: Control box, Lazer Smartview.

The light pattern is sharply defined at the top and bottom, which gives an enormous range (1463 m @ 0.25 lux / 732 m @ 1 lux), and directs the light exactly where it is needed most. The defined light image allows more stray light to spread out to the sides, while the color temperature of 5000K reduces the strain on the eyes and provides a pleasant user experience.

Each bar is delivered with a so-called Anti-Theft Unit, which is paired with a specific bar from the factory. With the help of this, the bar can be connected to the control box that controls its special functions. The anti-theft device is unique to each bar, and without it the bar cannot be used. If it were to be stolen, it is therefore impossible to use the bar, as it does not work without its specific anti-theft device.

E-Mark Mode:

At this power level, the bar is classified as Emarkt and can be used in normal road traffic. Luminous flux 8850 lm and range 930 m @ 0.25 lux.

E-Boost Mode:

In Boost mode, the light flow and range increase significantly, in order to offer maximum performance at e.g. off-road use. Luminous flux 10170 lm and range 1463 m @ 0.25 lux. Not Emarked.

Speed Adapt Mode:

The light pattern is automatically adapted to the vehicle's speed, with a wider cone at low speeds and a longer range at higher speeds. The light pattern changes at speeds between 50-80 km/h. This function can only be activated via the separate control box and a CanM8 Duo decoder, which reads the car's speed. Not Emarked.

Near-View Mode:

When driving in bad weather or dense forest, you can use the Near-View mode, which provides plenty of light in the vicinity of the car, a bit like a fog light. Perfect for driving on forest roads when you don't need that much range. Not connected to the car's normal high beams, can be used even if they are turned off. Requires the separate control box. Not Emarked.

Dynamic Dip:

Dims the light when the bar is turned off or if the power mode is lowered, which makes it easier for the eyes to get used to the new light mode. Also reduces the glare of oncoming drivers. Requires the separate control box. Not Emarked.

ATTENTION! To control the special functions, a separate control box is required that is mounted inside the car. Control box is included in the complete package, but can also be purchased separately here: Control box, Lazer Smartview.

Delivery content

• Lazer Triple-R 1250 Smartview, black
• Anti-Theft Unit
• Rail mounts
• Side mounts
• Manual for assembly and connection

Delivery content (1 pc, complete set)

• Lazer Triple-R 1250 Smartview Standard Package (all above)
• Control box
• CanM8 DUO controller for automatic light adjustment
• Auxiliary light holder for EU license plate, Purelux
• Relay cable set Purelux, 12V

Technical specification

• Brand and model: Lazer Triple-R 1250 Smartview
• Area of use: Additional light for vehicles
• Reference number: 45
• Luminous flux: 8850 lm / 10170 lm (e-boost)
• Range (0.25 lux): 930 m / 1463 m (e-boost)
• Frame: Black aluminium
• Durable polycarbonate lens with lifetime warranty
• Protection class: IP67
• Operating voltage: 9-32V (only 12V relay included)
• Lifespan: approx. 50,000 hours
• Weight: 1940 g
• Dimensions: 590 x 103 x 73 mm (W/D/H)
• E-marked
• Country of manufacture: United Kingdom
• Warranty: 60 months

Wiring diagram

ATTENTION! Unlike the wiring diagram in the manual, the control box's brown cable must be connected to (+) on the car's own high beams or to the CAN relay's ignition cable (so not to the black ground cable as shown in the picture). This applies unless the CanM8 Duo module is used. It thus functions as the bar's ignition cable, in addition to the yellow cable.