Work light AGGE Lighthouse Hybrid 230V, 40W

AGGE Lighthouse Hybrid is an efficient and versatile work light that can be used both from the electrical outlet and with a built-in battery. The vertical slimmed structure makes the Lighthouse Hybrid a very practical light that can fit even in a small space and spreads light with a completely flat 360° beam widely around. The durable Lighthouse Hybrid is equipped with two different power modes, the more moderate of which produces a light output of 1600 lumens and the larger one produces a light output of 3200 lumens, so this tower light can illuminate even a larger room or workspace. Thanks to the adjustable light output, the lighting can be proportioned to suit the size of the space, so that the eyes are not strained by too bright lighting or too little light. In addition, the work light is equipped with a pleasant color temperature of 4000 Kelvin, which combined with the even light distribution, ensures pleasant lighting and makes the Lighthouse Hybrid an excellent general light for construction sites. The evenly spread light beam does not create sharp shadows or other phenomena that strain the eyes, so the light is also well suited for long working periods and in spaces where no other light is available. The built-in battery enables use even in situations where mains power is not available.

AGGE Lighthouse Hybrid has been created to withstand the stresses that are inevitably encountered in the career of work lights, such as dust, moisture and shocks, as evidenced by e.g. the light's IK10 impact resistance rating and IP54 tightness rating. The light has three support legs, which can be easily lowered without separate tools to support the light, but of course, on a flat surface or in tight spaces, the light can also be used without them, thus minimizing the floor area required by the light. In the lower part of the frame, there is a convenient carrying handle, from which the light construction light (3800 g) can be easily carried and moved from one place to another. When using the battery, the light works with maximum light output for approx. 2 hours and with lower light output for approx. 4 hours at a time. When the battery runs out, you can continue using the light normally from the mains while the battery is fully charged again. There is also a USB-A output port at the base of the light's body, which can be used, for example, to charge battery-powered tools, pocket and headlights, or even a phone. One year (12 months) warranty!

Delivery content

• AGGE Lighthouse Hybrid
• Power cord/charging cord with EU plug, 3 m
• Manual

Technical specifikation

• Brand and model: AGGE Lighthouse Hybrid
• Area of use: As a work light, e.g. at a construction site
• Operating voltage: 220 - 240 V
• Battery: 14.8V 4400 mAh Li-ion
• Type of light source: Fixed LED
• Electrical power: 40 W
• Declared light output:
  • 180° lighting: 160-1600 lm (dimmable)
  • 360° lighting: 320-3200 lm (dimmable)
• Operating times:
  • 180° lighting: full power 4 h, minimum power 140 h
  • 360° lighting: full power 2 h, minimum power 60 h
• Declared color temperature: 4000 K
• Beam angle: 360°
• USB-A output: 5V 1A
• Dimensions: 1037 x 170 mm (Height x Width)
  • Width with support legs: 750 mm
• Power cord length: 3 m
• Weight: 3800 g
• IP rating: IP54
• Impact resistance: IK10
• Protection class: Protection class III
• Operating temperature: -10°C to +45°C
• Approvals: CE, RoHS, EMC
• Warranty: 12 months

Quick guide

Installation and use: Loosen the tightening nut on the top of the carrying handle by turning it counterclockwise and lower the support legs to the operating position and tighten the tightening nut by turning it clockwise. Connect the plug to a suitable power socket. The light can be returned to the transport position by loosening the tightening nut and lifting the carrying handle towards the upper end of the light part. Tighten the clamping nut when the desired position is reached.

Changing the power mode: Select the desired power mode by pressing the power button of the light. The power mode changes with each press.

Charging: The battery's four charging indicators show the battery's charge. Connect one end of the supplied charging cable to the light and the other to the mains, and the battery will charge. The light can be used normally during charging.

Manufacturer's installation and operating instructions: AGGE Lighthouse Hybrid 230V, 40W manual (opens in a new window).