Auxiliary light stand Purelux Single Bracket Kit, Tesla Model SXY

Purelux's Single Bracket Kit Tesla SXY is an auxiliary light bracket kit designed for Tesla Model X, Y and S, which consists of two lower brackets and two upper brackets, with which the additional light can be attached neatly and discreetly to the recess in the bumper of the aforementioned Teslas. As the name suggests, the upper support is attached to the upper part of the recess, while the lower support is attached to the lower part of the recess, allowing the lamp to be installed very neatly below the license plate. The upper support is attached with screws, but the lower support is attached with super-strong 3M double-sided tape, so there is no need to make holes in the lower edge of the opening (=visible part), i.e. if the light is ever removed, no traces of the installation will be visible. Thanks to the car-specifically dimensioned and shaped brackets, the light fits into the recess elegantly directly at the level of the bumper, so the end result is smooth and makes the installation look as if the light had already been in place when it left the factory.

The Single Bracket mounts attach to the lamp from the end leg mounting points, and the distance between them can be adjusted in height, so they are compatible with virtually any additional light panel that only fits in the recess in the bumper of a Tesla Model X, Model Y or Model S due to its size. . Single Bracket brackets are suitable for all recesses with a height of 76-119 mm. The brackets are attached to the bumper with a total of 6 screws from above and 3M tape from below, which ensure a sturdy and wobble-free installation and the fact that no additional supports are needed.

In the recess in the bumper of Model X, Model Y and Model S, e.g. Purelux's Panther Aero S540 or Purelux Road Curve C530.

Note! See also the ready-made additional light sets assembled on the base of the brackets:

• Auxiliary light set Tesla Model S
• Auxiliary light set Tesla Model X
• Auxiliary light set Tesla Model Y

Technical information

• Product: Auxiliary light bracket Purelux Single Bracket Kit Tesla Model S/X/Y
• Purpose: Installation of an additional light on the Tesla Model S/X/Y bumper
• Dimensions of a single bracket: 25 x 45 x 67 mm
• Installation opening height: 76 - 119 mm
• The brackets are supplied with 6 fixing screws
• 3M tape ready for the bottoms