Control panel Purelux Flash Panel Controller

The Purelux Flash Panel Controller is a control panel designed for the Purelux Flash warning light series that allows the lights to be easily operated directly from the vehicle's interior. the control panel makes it possible to control all warning light functions and turn the light on and off by, for example, pressing a button directly from the driver's seat. The control panel makes it incredibly easy to select and change the different operating modes of the warning light: when the warning light is connected to the warning light and switched on, the control panel inside can be set to model the flashing function of the warning light. When the hazard light operating mode is changed, the panel LEDs also change to the same operating mode to indicate which mode is selected. This makes it easy to select a suitable operating mode. Once a suitable flash function has been found, the light on the panel can be turned off so that it does not disturb or dazzle the driver while driving. The warning light itself is of course still on. Thanks to this function, the driver does not have to stop working and get out of the vehicle to see which function is in use, with the push of a button you can switch on/off or change the operating mode.

The super handy Flash Panel Controller has an On/Off button for the warning light and a separate Mode button from which the operating mode of the warning light can be changed. In addition, there is a button on the panel that can be used to turn the Controller's own lights on and off. A direct wire runs from the Flash Panel Controller to the warning lamp, with separate wires for power, ground, and control of operating modes. the control panel's own power cord is 250 cm long, so it can be connected to a larger vehicle as well. The Flash Panel Controller is equipped with a magnet on the underside, which allows it to be attached to any metal surface. A magnetic mounting plate is also included, allowing the switch panel to be mounted to virtually any point in the vehicle by drilling into the plate. In this way, it always remains available and you can choose where the mounting should sit, so it looks nice and stylish!

Compatible warning lights

• Purelux Flash 800
• Purelux Flash 1200
• Purelux Flash 1400

Content

• Purelux Flash Panel Controller
• Magnetic mounting plate
• Screws for mounting plate
• User manual (EN)

Technical specification

• Make and model: Purelux Flash Panel Controller
• Area of use: Control to control the Flash Panel warning lights
• Operating voltage: 10 - 30V
• Current consumption: 18A
• Contact: Direct wire, no contact
• Power cord length: 250 cm
• Connection cable length: 45 cm
• Dimensions: 120 x 60 x 10 mm (Length x Width x Depth)
• Protection class: IP67
• Warranty: 24 months

Quick guide

Coupling

Connect the power cable from the circuit breaker panel and the lamp power cable separately. You can synchronize the controller and warning light bar by pressing the MODE-button for about 10 second once wires are connected and the light is ON.

• Red: Current
• Black: Grounded
• Yellow: Operating mode