Warning light bar Purelux Flash 400 - 380 mm / 87W / 12/24V

The Purelux Flash Panel is a very stylish and slim flash light ramp, mainly developed for demanding professional use. Flash Panel is an excellent alternative for e.g. service vehicles, where the flashing light does not need to be used continuously and can advantageously be removed when not in use. The ramp can be stored in the car to always be easily accessible, and can be easily attached to the roof if needed. The main function of the flash light is to alert those moving around the site to ensure the safety of both workers and others moving around the area. The Purelux Flash Panel is equipped with 13 different power modes and powerful light that ensures that the vehicle is clearly visible to all passers-by.

The frame of the flashlight ramp is vibration and corrosion protected, and also waterproof and dustproof according to IP67 classification. The lens is also made of almost unbreakable polycarbonate. The operating voltage of 10-30V makes it possible to use the same warning light on cars and vans as well as on heavier vehicles (e.g. trucks, tractors, work machines, etc.). 360° light angle!

The Flash Panel is E-marked and approved for traffic use, and its ECE R65 Class 2 classification means that it is also approved for both day and night use. Flash Panel has separate power modes adapted for night and day use. During the day, the lamp shines at full power to provide the best possible visibility, and when used at night, the brightness is lower so as not to risk dazzling drivers, passers-by or other workers around the workplace.

The slim and modern design combined with the very low profile enables a stylish installation on any vehicle. Additionally, the ramp's low profile reduces drag compared to traditional flash light ramps, significantly reducing wind noise. The magnet assembly raises the ramp slightly from the level of the substrate, allowing the airflow to flow under the panel. In addition, it ensures that the light is clearly visible from the roof of the vehicle. The magnetic attachment is intended for occasions where a permanent installation is not desirable or possible.

ATTENTION! The Purelux Flash Panel is ECE R65 Class 2 approved, which means it can be used in European traffic! Class 2 means that the luminous flux is sufficient for both night and day use.

Also available in a smaller model with magnetic attachment: Flash Panel 250, as well as in larger models with fixed mounting: Flash Panel 800, Flash Panel 1200 and Flash Panel 1400.

Content

• Purelux Flash Panel 400
• Magnetic feet
• Power cable with cigarette adapter, 2500 mm

Technical specification

• Brand and model: Purelux Flash Panel 400
• Area of use: Warning/strobe lights
• Operating voltage: 10-30 V
• Measured power consumption: max. 87W @ 12V / 76W @ 24V
• E-marking: ECE R65 Class 2
• ECE R10, CISPR 25 Class 3, SAE J845 Class 1
• Protection class: IP67
• 13 different effect modes
• Orange light
• Very low profile
• Dimensions: 381 x 36 x 220 mm (L x H x D)
• Weight: 1500 g
• Height incl. foot: 48 mm
• Warranty: 24 months

Power modes

• Single flashing ( Day mode )
• Single flashing ( Night mode )
• Single blink
• Double flashing
• Triple flashing
• Rotating flashing
• Combo, single/triple flash
• Combo, single/multi-flash
• Triple flashing (front and back)
• Triple flash + Single flash
• Triple flashing + Single flashing + rotating flashing
• Strobe / 600 FPM
• Even light (cruise)

Connection manual