LED strip AGGE Lite 230V - 400 lm/m, 5 m

AGGE Lite is a high-quality and durable led strip that is suitable for both indoor and outdoor use, both at home and on the job site. The tape works directly from mains power (230V), thanks to which it is easy to install practically anywhere, and it can also be easily moved from one place to another if necessary. Lite tape/tapes can be used to create stylish and even lighting, e.g. in the yard of a home or holiday apartment, which can also be used as a general light for warehouses, garages or yard buildings, for example. AGGE Lite is also an excellent choice for lighting construction sites and renovation sites, as their flexible and durable structure, neutral color temperature of 4000 kelvins and even light distribution offer an optimal whole for working as well. The light output of the strip is 400 lumens per meter and the light opening angle is up to 120°, so there are no sharp shadows or dark corners around the strip.

The AGGE Lite light strip can be attached to, for example, a terrace or patio, stairs, garden fence, plantings around walkways, house borders or, for example, the railings of a cottage beach pier. Indoors, the light strip can be installed practically anywhere, so there are unlimited uses! The color rendering index (CRI) of the light strip is over 80, so its light resembles neutral, eye-pleasing natural light, which is ideal both for general lighting and for tasks that require precision. If necessary, the light strip can be extended up to a length of over 100 meters (600W), so the lighting can always be modified to suit the use. The strip has 60 LEDs per meter, and it is completely waterproof according to the IP65 classification, so it can be used without worry even in damp rooms and outdoors, regardless of the season.

Plastic brackets are available as accessories for the LED strip, which can be used to attach the strip to the wall or ceiling to hang. A mounting rail is also available for attaching the strip, which allows it to be installed neatly practically anywhere. Magnetic cable clips can also be used for fastening, which are available in both 22 mm and 31 mm sizes. If necessary, the power cord can also be purchased separately: Power cord AGGE Lite, 150 cm.

Note! The tape works with 230V direct current (instead of alternating current), which means that it requires its own power cord (with a direct current transformer) to be used when connecting to the mains. Straighten the entire strip before turning on the power to avoid overheating!

AGGE Lite light strips are available in 5 m, 10 m and 25 m lengths. Other available options can be found below:

• AGGE Lite 230V - 400 lm/m, 5 m
• AGGE Lite 230V - 400 lm/m, 10 m
• AGGE Lite 230V - 400 lm/m, 25 m

Basic delivery content (LED strip only)

• LED strip
• Instructions

Delivery contents (LED strip + Power cord)

• LED strip
• Power cord with DC transformer
• Instructions

Technical information

• Product: AGGE Lite 230V, 5 m
• Intended use: Indoor and outdoor home use, construction site lighting
• Apparent light output: 400 lm / m, total 2000 lm
  • Light output measured by Valostore:
• Operating voltage: 230 V (direct current)
• Apparent power consumption: 4.5W / m, total 22.5 W
• Dimensions LED strip: 12 x 6.5 mm (Width x Height)
• Dimmable: No
• Color tone: 4000 K
• Color rendering (CRI): Ra80+
• Light opening angle: 120°
• IP rating: IP65 (tape and connections) / IP44 (plug)
• Protection class: II
• Power cord length: 1500 mm
• Operating temperature: -25°C to +45°C
• Storage temperature: -10°C to +30°C
• Approvals: CE (RoHS, LVD, EMC)
• Other: The tape can be extended up to 600W
• Warranty: 12 months

Quick guide

Connecting LED strips to each other

1. Turn the connector cap counterclockwise to remove it from the first LED strip
2. Disconnect the power cable from the second set of LED strips
3. Connect the LED strip sets by connecting the female and male connectors together. Tighten the connection cap.
4. Repeat the previous steps for the following sets of LED strips.
5. Attach the end cap of the tape and tighten carefully so that it does not come off and water does not get inside the cap.

NOTE! Make sure the power cable is not attached to the power plug when connecting the strips together. Do not exceed the manufacturer's maximum power value of 600W! You can't break the tape either. Unroll the entire strip before turning on the power to avoid overheating! 

Implementation of the LED strip

• Unroll the entire strip before turning on the power to avoid overheating! Make sure the LED strip connections are properly tightened. Install the LED strip according to the instructions and with the fixing accessories intended for fixing, and make sure that there are no hazardous substances such as water, flammable gases or fine dust in the environment. Attach the power cable to the 230V power plug.

You can find the manufacturer's user manual by clicking here.