Backup power source AGGE Emergency Power Bank

The AGGE Emergency Power Bank is the perfect backup power source for AGGE 230V LED strips, especially on construction sites where power outages can occur. In the event of a power failure, the Emergency Power Bank automatically activates and keeps your LED strip lit at reduced power, allowing safe movement during temporary outages in dark environments. The power bank provides up to 60 minutes of emergency power and can be recharged and used again in case of recurring power outages. The Emergency Power Bank can power up to 130 meters of AGGE Lite 230V LED strip (600W) or 100 meters of the more powerful AGGE 230V strip (1200W).

The backup power source is easily installed between the LED strip's power cable and the power outlet, allowing the strip to function normally when the mains power is active, but automatically switching to the backup power source in the event of a power failure. The device supports loads between 20-1500W (below 20W the backup power source is not activated). The Emergency Power Bank is protected against water and dust in accordance with the IP65 protection class, which means it is suitable for both indoor and outdoor use.

When the LED strip is powered by the Emergency Power Bank, the power of the strip is lowered to the so-called emergency mode, which is clearly weaker than full power, but provides enough lighting movement in the mode.

Note: the Emergency Power Bank must always be connected to the LED strip's power cable and cannot be used separately without connection to a mains power supply.

Compatible LED strips

AGGE Lite 230V

• AGGE Lite 230V - 400 lm/m, 5 m
• AGGE Lite 230V - 400 lm/m, 10 m
• AGGE Lite 230V - 400 lm/m, 25 m

AGGE 230V

• AGGE 230V - 1500 lm/m, 3 m
• AGGE 230V - 1500 lm/m, 5 m
• AGGE 230V - 1500 lm/m, 10 m
• AGGE 230V - 1500 lm/m, 15 m
• AGGE 230V - 1500 lm/m, 15 m (with cable reel)
• AGGE 230V - 1500 lm/m, 20 m
• AGGE 230V - 1500 lm/m, 25 m
• AGGE 230V - 1500 lm/m, 25 m (with cable reel)
• AGGE 230V - 1500 lm/m, 50 m
• AGGE 230V - 1500 lm/m, 50 m (with cable reel)

Emergency Power Bank must not be used with other LED strips than AGGE 230V.

Technical specification

• Make and model: AGGE Emergency Power Bank
• Application: as backup power source for AGGE LED strip
• Input voltage: 100-277V (AC)
• Output voltage: 50-180V (DC)
• Capacity: 97.7 Wh
• Load capacity: 20-1500 W
• Power source max. power: 50W
• LED strips are powered from backup power source for 2 x 60 min
• Charging time for backup power source: approx. 24 hours
• Dimensions: 285 x 50 x 90 mm (width x height x depth)
• Weight: 2300 g
• Protection class: IP65
• Operating temperature: -10°C to +50°C
• Approvals: CE
• Warranty: 24 months