Warning light Purelux Flash 400 Gen2 - Panel / 12/24V / 78W / 400 mm

• Works from the cigarette lighter socket
• Magnetic mounting
• R65 approved warning light
• 9 different flashing functions
• 360° lighting
• Highest possible IP rating
• The best radio interference protection on the market
• Stylish dark profile

The Purelux Flash 400 Gen2 is a new generation warning light panel with a very low and aerodynamic profile that meets the quality standards of demanding work in every area. The panel is equipped with, among other things, 9 different flashing functions, a warning light approved for road use according to the R65 standard, a shock-, water- and dust-resistant structure, the best possible radio interference protection (CISPR25 Class 5) and a modern dark appearance. Unlike many other beacon panels, the Flash 400 Gen2 is also very easy to install, as it is powered directly from the vehicle's cigarette lighter socket and is attached using magnetic feet. This means that the light does not require any connections to be put into operation, and there is no need to drill holes in the vehicle for mounting bolts! The Purelux Flash 400 Gen2 is the perfect choice for, for example, maintenance and control vehicles and all applications where the beacon is not needed constantly, but you want to remove it whenever you are not using it. The Flash 400 Gen2 spreads light 360° around it, increasing the safety of everyone around the vehicle.

The panel's significantly lower profile than a normal beacon and short skids ensure an aerodynamic and stylish installation that can withstand both speed and gaze. The panel's thin structure reduces air resistance and reduces wind noise, and the mounting skids allow the panel to be slightly raised from the mounting surface, allowing airflow to pass under the panel. The smoke-gray and impact-resistant polycarbonate lens wraps around the sides of the beacon as well as the top, giving the light a stunning visual appearance even when turned off.

The Purelux Flash Gen2 series includes a total of 7 beacon panels in different sizes. Check out the other models in the series below:

• Purelux Flash 400 Gen2
• Purelux Flash 600 Gen2
• Purelux Flash 800 Gen2
• Purelux Flash 1000 Gen2
• Purelux Flash 1200 Gen2
• Purelux Flash 1400 Gen2
• Purelux Flash 1800 Gen2

Delivery content

• Beacon panel Purelux Flash 400 Gen2
• Magnetic skates
• Power cord with cigarette lighter plug, 4000 mm
• Installation instructions (FI/EN/SE/NO/DK)

Specifications

• Brand and model: Purelux Flash 400 Gen2
• Intended use: As a warning and safety light in cars / work machines, etc.
• Operating voltage: 10-36V
• Manufacturer's stated current consumption: 6.5A @ 12V / 2.85A @ 24V
• Manufacturer's declared power: 78 W
• Mounting: Magnetic mounts
• Connector: Cigarette lighter plug
• Cable length: 400 cm
• Dimensions: 384 x 35 x 240 mm (Width/Height/Depth)
  • Height with skids: 77 mm
• Weight (with legs): 3000 g
• IP rating: IP69K
• Approvals: EMC: ECE R10, R65 Class 1, CISPR25 Class 5, CE, RoHS
• Operating temperature: -40°C - +50°C
• Warranty: 24 months
• Other: 9 different operating modes, orange light, Ultra low profile, 360° illumination
• Importer: Handshake.fi

Operating modes

• Single flash (R65 Class 1)
• Fast double flash (R65 Class 1)
• Slow double flash
• Multi-flash
• Combo single/double flash output
• Combo single/multiple flash
• Breathe
• Left arrow
• Right arrow

Quick guide

Operation: The lamp is connected to the vehicle's cigarette lighter socket. The socket has an On/Off switch and a separate Mode switch for changing operating modes. The operating modes change with each press when the lamp is on.

You can find the manufacturer's installation instructions by clicking here (opens in a new window).