Warning light Purelux Flash 800 Gen2 - Panel / 12/24V / 102W / 800 mm

• R65 approved warning light
• Separate day and night modes (R65 Class 2)
  
• 12 different flashing functions
• Separate Cruise mode
  
• 360° lighting
• Highest possible IP rating
• The best radio interference protection on the market
• Stylish dark profile

The Purelux Flash 800 Gen2 is a new generation warning light panel with an ultra-low and aerodynamic profile that meets the quality standards of demanding work environments in every aspect. The panel is equipped with 12 different flashing functions, a warning light approved for road use according to the R65 standard, an impact, water and dust resistant construction, the best possible radio interference protection (CISPR25 Class 5) and a modern dark appearance. In addition, the panel also features the much-needed Cruise mode, which allows the light to burn steadily without flashing, for example in mines. The panel spreads the light 360° around the vehicle, increasing the safety of everyone around the vehicle. In addition, it has both day and night modes (brighter in daytime and dimmer at night), in accordance with ECE R65 Class 2, so that the light does not dazzle at night, but still attracts attention in bright light.

In terms of size, power and functions, the Flash 800 Gen2 is an excellent warning light for cars, vans and SUVs, as well as part of a heavy vehicle lighting solution, especially if two panels are installed side by side. Multiple Flash Gen2 beacon panels can also be synchronized to work with each other if desired, providing uniform lighting even on larger vehicles that require more lights.

The panel's significantly lower profile than a normal beacon and short skids ensure an aerodynamic and stylish installation that can withstand both speed and gaze. The panel's thin structure reduces air resistance and reduces wind noise, and the mounting skids allow the panel to be slightly raised from the installation surface, allowing airflow to pass under the panel. The smoke-gray and impact-resistant polycarbonate lens wraps around the sides of the beacon as well as the top, giving the light a stunning visual appearance even when turned off. Two-year (24 months) warranty!

Note! You can buy either the warning light alone or a set that includes the panel and the Purelux Flash Panel Controller Gen2 switch panel, which allows you to easily operate the warning light from the vehicle's cab! The switch panel does not have a direct connector for the warning light, so you have to make the connection yourself.

The Purelux Flash Gen2 series includes a total of 7 beacon panels in different sizes. Check out the other models in the series below:

• Purelux Flash 400 Gen2
• Purelux Flash 600 Gen2
• Purelux Flash 800 Gen2
• Purelux Flash 1000 Gen2
• Purelux Flash 1200 Gen2
• Purelux Flash 1400 Gen2
• Purelux Flash 1800 Gen2

Delivery content

• Beacon panel Purelux Flash 800 Gen2
• Mounting rails
• Mounting bolts
• Power cord without connector, 5000 mm
• Installation instructions (FI/EN/SE/NO/DK)

Specifications

• Brand and model: Purelux Flash 800 Gen2
• Intended use: As a warning and safety light in cars / work machines, etc.
• Operating voltage: 10-36V
• Manufacturer's stated current consumption: 8.45A @ 12V / 3.9A @ 24V
• Manufacturer's declared power: 102 W
• Mounting: Mounting foot set, mounting bolts
• Connector: No connector, straight wires
• Cable length: 500 cm
• Dimensions: 784 x 35 x 240 mm (Width/Height/Depth)
  • Height with skids: 77 mm
• Weight (with legs): 5900 g
• IP rating: IP69K
• Approvals: EMC: ECE R10, R65 Class 2, CISPR25 Class 5, CE, RoHS
• Operating temperature: -40°C - +50°C
• Warranty: 24 months
• Other: 12 different operating modes, orange light, Ultra low profile, 360° illumination
• Importer: Handshake.fi

Operating modes

• Single flash (R65 Class 2 )
• Fast double flash (R65 Class 2)
• Slow double flash
• Multi-flash
• Combo single/double flash output
• Combo single/multiple flash
• Breathe
• Left arrow
• Right arrow
• Arrow from the middle
• Cruise (connected with a separate wire, check quick guide)
• R65 Night mode (connected with a separate wire, check quick guide)

Quick guide

Coupling

• Red: Power (+)
• Black: Ground (-)
• Yellow: Warning light functions and synchronization
• Blue: Warning light #1 (R65 Night Mode)
• White: Cruise light
• Brown: Traffic control, left/right

Hazard light functions: Touch the red wire with the yellow wire for less than 1 second to switch the flashing functions.

Synchronization: Connect the yellow wire of each luminaire to be synchronized.

Flashing function #1 (R65): Touch the red wire with the blue wire for less than 1 second.

Night mode: Touch the red wire with the blue wire for 5 seconds. The light brightness will decrease by 50% in all flashing modes (does not apply to steady light). To disable night mode, disconnect the wire.

Steady light: Connect the white wire to the red wire. To disable steady light, disconnect the wire. The warning panel will return to the last flashing function used.

Traffic control: Touch the red wire with the brown wire for 1 second. The light activates the left turn signal. Touch the red wire with the brown wire for 5 seconds to activate the right turn signal.

You can find the manufacturer's installation instructions by clicking here (opens in a new window).