Warning light Purelux Strobe Sweeper HD - 18W / 12/24V

Purelux Strobe Sweeper HD is a slim and stylish warning light/strobe light approved for road traffic. The Strobe Sweeper HD is specially designed to be part of the lighting system for heavy equipment and work machines. Unique to the Sweeper is its versatile mounting options, the light comes with both separate mounting feet and brackets that allow for surface mounting. With the mounting feet, the luminaire is raised from the installation surface, which simplifies adjustment of the lighting angle. The Sweeper HD has up to 14 different operating modes that are approved for road traffic in accordance with the ECE R65XA2 standard. The XA2 marking in the approval allows use for separate day and night mode. If desired, several lights can also be synchronized, so that, for example, the lighting of the entire vehicle can be uniform.

The Sweeper HD can be installed practically anywhere: on the side, the back, or why not on the bumper. Mount the light where bright orange or flash light is needed. By mounting the light together with the mounting feet, the light can be mounted, for example, in the front/grill, under the bumper or on uneven and inclined surfaces, as the light can be directed in the desired direction by adjusting the lighting angle. Of course, the Sweeper can also be mounted directly on the surface of the vehicle using the included surface mount brackets instead of the mounting foot, with the Sweeper HD you don't have to compromise!

The Sweeper's performance is based on six high-performance 3W LED diodes, which have a strong orange glow. Thanks to the separate day and night modes, you can choose the power mode that suits your needs: in the day mode, the warning light is bright enough to be noticed in daylight, while in the night mode, the light power is lower so that it does not dazzle the driver or others moving in the area. A dimmed night mode can be switched on by connecting the white wire coming from the lamp's power cord. The elegant appearance combined with its slim size ensures that the Sweeper HD fits virtually any vehicle. The light is electromagnetically protected against radio interference in accordance with the R10 standard. Two year (24 month) warranty!

Sweeper HD lights can be synchronized with Purelux Strobe HD warning lights. Although Strobe HD lights have more operating modes than Sweeper HD lights, the lights can be synchronized by selecting the same operating mode from both lights and performing the synchronization of the lights by following the instructions mentioned below.

Note! The Purelux Sweeper HD is ECE R65XA2 approved, which means that the light can be used in European road traffic! The XA2 marking in the approval means that the light has separate day and night mode.

Content

• Purelux Sweeper HD
• Mounting foot
• Surface mount brackets
• Mounting screws
• Connection and installation instructions (FI/SE/NO/DK)

Technical specification

• Brand and model: Warning / Flash light Purelux Strobe Sweeper HD - 18W / 12/24V
• Purpose: As attention and safety light for traffic and construction sites
• LED: 6 x 3 W
• Light colour: Orange
• Operating voltage: 10 - 30V
• Manufacturer's reported power: 18 W
• Manufacturer's reported current consumption: 0.9A @ 12V / 0.45A @ 24V
• Operating modes: 14
• Dimensions: 90 x 22 x 19 mm (length x width x depth)
• Weight (without brackets): 58 g
• Cable length: 150 mm
• Approvals: EMC: ECE: R10, R65XA2
• Protection class: IP67
• Warranty: 24 months
• Importer: Handshake.fi

Operating modes

• Single flash (R65 approved)
• Dual flash (R65 approved)
• Single Flash (SAE)
• Dual flash (SAE)
• Quad Flash (SAE)
• Simple flash (fast)
• Dual flash (fast)
• Quad Flash (fast)
• Continuous quad flash (fast)
• Combo 1
• Combo 2
• Accelerating blink
• Mixed
• Continuous light

Installation guide

Coupling

• Red: Orange warning light (+)
• Black: Ground (-)
• Blue: Synchronization, switching of operating mode
  • Synchronization: select the same operating mode for the lamps to be synchronized, then connect the blue wires of the lamps. In this way, the lamps flash in the same rhythm and change operating mode (all together) when the operating mode of a lamp changes.
  • Change operating mode: Connect power (+) to the blue wire, the lamp changes operating mode. Can be implemented with a switch (the cable is connected to the battery or other power source, and a switch in between)
• White: Night Mode (+)
• Green: Continuous light, even if the flash function is activated using the blue wire.

Synchronizes: If desired, several Sweeper HD lamps can be connected together to work together, then the lamps are synchronized with each other. In this way, the warning lights on large vehicles or work machines can be made to flash in the same operating mode at the same time. The lamps can be synchronized with each other by connecting the blue wires coming from the lamp. If you want some of the lights to flash at a different rate than the rest, you can group the lights into either group 1 or group 2. This is done by connecting the blue wire for 7 seconds to the power (+), after which the connected lights are grouped into a group: three LEDs light up on the light to mark its placement in group 1. By connecting the blue wire again for a second, all six diodes light up, to mark the grouping group 2. The same should be repeated for all lights, in which case they can be synchronized to blink at different rates. In this case, for example, half of a large number of lights can be made to flash at a different time than the other half. Of course, the alternation can be activated with only two lights. Synchronization works with lamps in the same series, that is, all Sweeper HD lamps installed on the vehicle can be synchronized together.

Manufacturer's installation and connection instructions: Purelux Sweeper HD manual (opens in new window)